I’ve been asked a question that I can’t currently answer. Has anyone on
this list tried the SCSI PassThrough Interface on the ATAPI.SYS driver that
ships with Windows? Does it get completely ignored? Is it partially
implemented? Does it cause a BSOD?
Thanks,
Phil
Philip D. Barila
Seagate Technology, LLC
(720) 684-1842
You are currently subscribed to ntdev as: $subst(‘Recip.EmailAddr’)
To unsubscribe send a blank email to leave-ntdev-$subst(‘Recip.MemberIDChar’)@lists.osr.com
I believe it is supported. Obviously not all scsi requests will work.
-----Original Message-----
From: xxxxx@seagate.com
[mailto:xxxxx@seagate.com]
Sent: Tuesday, February 12, 2002 12:39 PM
To: NT Developers Interest List
Subject: [ntdev] SPTI on ATA stack?I’ve been asked a question that I can’t currently answer.
Has anyone on this list tried the SCSI PassThrough Interface
on the ATAPI.SYS driver that ships with Windows? Does it get
completely ignored? Is it partially implemented? Does it
cause a BSOD?Thanks,
Phil
Philip D. Barila
Seagate Technology, LLC
(720) 684-1842
You are currently subscribed to ntdev as:
xxxxx@stratus.com To unsubscribe send a blank email to
leave-ntdev-$subst(‘Recip.MemberIDChar’)@lists.osr.com
You are currently subscribed to ntdev as: $subst(‘Recip.EmailAddr’)
To unsubscribe send a blank email to leave-ntdev-$subst(‘Recip.MemberIDChar’)@lists.osr.com
Why not just try it and see? I would be curious to know the results.
Greg
-----Original Message-----
From: xxxxx@lists.osr.com
[mailto:xxxxx@lists.osr.com]On Behalf Of
xxxxx@seagate.com
Sent: Tuesday, February 12, 2002 11:39 AM
To: NT Developers Interest List
Subject: [ntdev] SPTI on ATA stack?
I’ve been asked a question that I can’t currently answer. Has anyone on
this list tried the SCSI PassThrough Interface on the ATAPI.SYS driver that
ships with Windows? Does it get completely ignored? Is it partially
implemented? Does it cause a BSOD?
Thanks,
Phil
Philip D. Barila
Seagate Technology, LLC
(720) 684-1842
You are currently subscribed to ntdev as: xxxxx@pdq.net
To unsubscribe send a blank email to leave-ntdev-$subst(‘Recip.MemberIDChar’)@lists.osr.com
You are currently subscribed to ntdev as: $subst(‘Recip.EmailAddr’)
To unsubscribe send a blank email to leave-ntdev-$subst(‘Recip.MemberIDChar’)@lists.osr.com
Offline, Mark pointed out that there is an SPTI gadget in the DDK. So I
found that, tried it, and will spend the next little while figuring out
what it’s telling me. But some stuff definitely does work.
If you installed the storage samples, the gadget is in %BASEDIR%
\src\storage\tools\spti
Phil
“Gregory G. Dyess” @lists.osr.com on 02/12/2002 11:42:18
AM
Please respond to “NT Developers Interest List”
Sent by: xxxxx@lists.osr.com
To: “NT Developers Interest List”
cc:
Subject: [ntdev] RE: SPTI on ATA stack?
Why not just try it and see? I would be curious to know the results.
Greg
-----Original Message-----
From: xxxxx@lists.osr.com
[mailto:xxxxx@lists.osr.com]On Behalf Of
xxxxx@seagate.com
Sent: Tuesday, February 12, 2002 11:39 AM
To: NT Developers Interest List
Subject: [ntdev] SPTI on ATA stack?
I’ve been asked a question that I can’t currently answer. Has anyone on
this list tried the SCSI PassThrough Interface on the ATAPI.SYS driver that
ships with Windows? Does it get completely ignored? Is it partially
implemented? Does it cause a BSOD?
Thanks,
Phil
Philip D. Barila
Seagate Technology, LLC
(720) 684-1842
—
You are currently subscribed to ntdev as: xxxxx@pdq.net
To unsubscribe send a blank email to leave-ntdev-$subst(‘Recip.MemberIDChar’)@lists.osr.com
—
You are currently subscribed to ntdev as: xxxxx@seagate.com
To unsubscribe send a blank email to leave-ntdev-$subst(‘Recip.MemberIDChar’)@lists.osr.com
—
You are currently subscribed to ntdev as: $subst(‘Recip.EmailAddr’)
To unsubscribe send a blank email to leave-ntdev-$subst(‘Recip.MemberIDChar’)@lists.osr.com
Hi,
We have own ASPI layer emulation DLL that has SPTI low edge. Works fine
with ATAPI.SYS from 2K and XP. At least I can use ATAPI CD burner devices
with CD burning applications.
Regards,
Anton
On 02/12/02, “xxxxx@seagate.com” wrote:
I’ve been asked a question that I can’t currently answer. Has anyone on
this list tried the SCSI PassThrough Interface on the ATAPI.SYS driver that
ships with Windows? Does it get completely ignored? Is it partially
implemented? Does it cause a BSOD?Thanks,
Phil
Philip D. Barila
Seagate Technology, LLC
(720) 684-1842
You are currently subscribed to ntdev as: $subst(‘Recip.EmailAddr’)
To unsubscribe send a blank email to leave-ntdev-$subst(‘Recip.MemberIDChar’)@lists.osr.com
You are currently subscribed to ntdev as: $subst(‘Recip.EmailAddr’)
To unsubscribe send a blank email to leave-ntdev-$subst(‘Recip.MemberIDChar’)@lists.osr.com
> I’ve been asked a question that I can’t currently answer. Has anyone on
this list tried the SCSI PassThrough Interface on the ATAPI.SYS driver that
ships with Windows? Does it get completely ignored?
I only tried SMART_RCV_DRIVE_DATA on NT4.
Works fine, regardless of whether the disk support SMART.
Max
You are currently subscribed to ntdev as: $subst(‘Recip.EmailAddr’)
To unsubscribe send a blank email to leave-ntdev-$subst(‘Recip.MemberIDChar’)@lists.osr.com