Hi,
I’ve just bought your card USB-FX-2 to start a selfmade formation about UDB driver, I’ve downloaded all the sample from the WDK , all the solution compile well but it is impossible to install the driver.
For example , if I take the HID client sample driver , I change the configuration for a Win7 I make the compilation with no errors , if I plug the card and I try to install the driver I’ve just compiled, each time it says that no driver are available for my system on the compiled directory.
I’ve the same problem for all the project.
The card apperas in the control panel as OSR USB-FX2 LK as I’ve an “H” on the LCD and the bargraph is 80% ON.
Could you help me to start
Thanks
Have you updated the vendor ID and hardware ID in the inx file ? In any case
I would not expect a HID sample from the WDK to suit the \usb\OsrUsbFx2
device without modification.
Did you not try to build and install the sample in the usb\osrusbfx2\final
directory ? When I received the package I compiled that sample and got it up
and running straight away (on 64-bit Windows a driver signature is required
though).
//Daniel
wrote in message news:xxxxx@ntdev…
Hi,
I’ve just bought your card USB-FX-2 to start a selfmade formation about UDB
driver, I’ve downloaded all the sample from the WDK , all the solution
compile well but it is impossible to install the driver.
For example , if I take the HID client sample driver , I change the
configuration for a Win7 I make the compilation with no errors , if I plug
the card and I try to install the driver I’ve just compiled, each time it
says that no driver are available for my system on the compiled directory.
I’ve the same problem for all the project.
The card apperas in the control panel as OSR USB-FX2 LK as I’ve an “H” on
the LCD and the bargraph is 80% ON.
Could you help me to start
Thanks
Hi,
In the HID client sample the HID and VID are good
%Fx2HidDeviceName%=Fx2Hid_Install, HID\VID_0547&PID_1002&Col03
%Fx2HidDeviceName%=Fx2Hid_Install, HID\VID_0547&PID_1002
Which sample do you talking about, I’ve only a card in my packet.
All the sample I’ve came from microsoft.
Thanks
The WDK7 comes with several step-by-step samples and a final for the
OsrUsbFx2 device which you can find in the \src\usb\osrusbfx2 directory.
What WDK version are you using ?
//Daniel
wrote in message news:xxxxx@ntdev…
Which sample do you talking about, I’ve only a card in my packet.All the
sample I’ve came from microsoft.
I use the last one I’ve downloaded it last week . It is the N? 8
I don’t find sample in the "C:\Program Files (x86)\Windows Kits\8.0" directory
All win8 samples are online, no longer in the kit media
d
From: xxxxx@gmail.commailto:xxxxx
Sent: ?1/?28/?2013 6:50 AM
To: Windows System Software Devs Interest Listmailto:xxxxx
Subject: RE:[ntdev] OSR FX2 and WDK sample
I use the last one I’ve downloaded it last week . It is the N? 8
I don’t find sample in the "C:\Program Files (x86)\Windows Kits\8.0" directory
—
NTDEV is sponsored by OSR
OSR is HIRING!! See http://www.osr.com/careers
For our schedule of WDF, WDM, debugging and other seminars visit:
http://www.osr.com/seminars
To unsubscribe, visit the List Server section of OSR Online at http://www.osronline.com/page.cfm?name=ListServer</mailto:xxxxx></mailto:xxxxx>
Yes I know it, that’s why I’ve opened this post , because I some problem to use the sample.
The sample compile correclty but the driver is not recognized by windows when I try to install the driver for my card.
Thanks
Hoe are you attempting to install the driver? What does the setupapi log say?
d
From: xxxxx@gmail.commailto:xxxxx
Sent: ?1/?28/?2013 7:30 AM
To: Windows System Software Devs Interest Listmailto:xxxxx
Subject: RE:[ntdev] OSR FX2 and WDK sample
Yes I know it, that’s why I’ve opened this post , because I some problem to use the sample.
The sample compile correclty but the driver is not recognized by windows when I try to install the driver for my card.
Thanks
—
NTDEV is sponsored by OSR
OSR is HIRING!! See http://www.osr.com/careers
For our schedule of WDF, WDM, debugging and other seminars visit:
http://www.osr.com/seminars
To unsubscribe, visit the List Server section of OSR Online at http://www.osronline.com/page.cfm?name=ListServer</mailto:xxxxx></mailto:xxxxx>
When compiling the HID client sample driver in Win7 release .
I try to update the driver from the property the OSR USB-FX2 LK .
I put “c:\WDKSample\HID client sample driver\C++\Win7Release” for directory and I include subdirectory.
Windows tell me that he don’t find any driver for my peripheral in this directory .
In the driver directory I’ve
Fx2Hid.dll
Fx2Hid.inf
hidkmdf.sys
hidusbfx2.inf
hidusbfx2.sys
kmdfsamples.cat
WdfCoinstaller01011.dll
winusbcoinstaller.dll
winusbcoinstaller2.dll
wudf.cat
WudfUpdate_01011.dll
Thanks
Setupapi log?
d
From: xxxxx@gmail.commailto:xxxxx
Sent: ?1/?28/?2013 8:06 AM
To: Windows System Software Devs Interest Listmailto:xxxxx
Subject: RE:[ntdev] OSR FX2 and WDK sample
When compiling the HID client sample driver in Win7 release .
I try to update the driver from the property the OSR USB-FX2 LK .
I put “c:\WDKSample\HID client sample driver\C++\Win7Release” for directory and I include subdirectory.
Windows tell me that he don’t find any driver for my peripheral in this directory .
In the driver directory I’ve
Fx2Hid.dll
Fx2Hid.inf
hidkmdf.sys
hidusbfx2.inf
hidusbfx2.sys
kmdfsamples.cat
WdfCoinstaller01011.dll
winusbcoinstaller.dll
winusbcoinstaller2.dll
wudf.cat
WudfUpdate_01011.dll
Thanks
—
NTDEV is sponsored by OSR
OSR is HIRING!! See http://www.osr.com/careers
For our schedule of WDF, WDM, debugging and other seminars visit:
http://www.osr.com/seminars
To unsubscribe, visit the List Server section of OSR Online at http://www.osronline.com/page.cfm?name=ListServer</mailto:xxxxx></mailto:xxxxx>
Ok sorry ,
Here is the setup api log
>> [DIF_ADDPROPERTYPAGE_ADVANCED - USB\VID_0547&PID_1002\6&30FA7FD6&0&3]
>> Section start 2013/01/29 08:01:23.382
cmd: “C:\Windows\System32\DeviceProperties.exe” “USB\VID_0547&PID_1002\6&30FA7FD6&0&3”
<<< Section end 2013/01/29 08:01:23.382
<<< [Exit status: SUCCESS (DI_DO_DEFAULT)]
>> [DIF_TROUBLESHOOTER - USB\VID_0547&PID_1002\6&30FA7FD6&0&3]
>> Section start 2013/01/29 08:01:24.814
cmd: “C:\Windows\System32\DeviceProperties.exe” “USB\VID_0547&PID_1002\6&30FA7FD6&0&3”
<<< Section end 2013/01/29 08:01:24.816
<<< [Exit status: SUCCESS (DI_DO_DEFAULT)]
>> [Build Driver List - USB\VID_0547&PID_1002\6&30FA7FD6&0&3]
>> Section start 2013/01/29 08:01:49.601
cmd: “C:\Windows\System32\DeviceProperties.exe” “USB\VID_0547&PID_1002\6&30FA7FD6&0&3”
cpy: Policy is set to make all digital signatures equal.
<<< Section end 2013/01/29 08:01:49.601
<<< [Exit status: SUCCESS]
>> [Build Driver List - USB\VID_0547&PID_1002\6&30FA7FD6&0&3]
>> Section start 2013/01/29 08:01:49.606
cmd: “C:\Windows\System32\DeviceProperties.exe” “USB\VID_0547&PID_1002\6&30FA7FD6&0&3”
cpy: Policy is set to make all digital signatures equal.
<<< Section end 2013/01/29 08:01:49.610
<<< [Exit status: SUCCESS]
>> [DIF_SELECTBESTCOMPATDRV - USB\VID_0547&PID_1002\6&30FA7FD6&0&3]
>> Section start 2013/01/29 08:01:49.610
cmd: “C:\Windows\System32\DeviceProperties.exe” “USB\VID_0547&PID_1002\6&30FA7FD6&0&3”
! dvi: Selecting driver failed(0xe0000228)
! dvi: Default installer: failed!
<<< Section end 2013/01/29 08:01:49.611
<<< [Exit status: FAILURE(0xe0000228)]
Thanks
Your inf is matching against a hid HW w, HID\VID_0547&PID_1002, you are trying to install on the parent device enumerated by USB, HW id USB\VID_0547&PID_1002.
d
From: xxxxx@gmail.commailto:xxxxx
Sent: ?1/?28/?2013 11:04 PM
To: Windows System Software Devs Interest Listmailto:xxxxx
Subject: RE:[ntdev] OSR FX2 and WDK sample
Ok sorry ,
Here is the setup api log
>>> [DIF_ADDPROPERTYPAGE_ADVANCED - USB\VID_0547&PID_1002\6&30FA7FD6&0&3]
>>> Section start 2013/01/29 08:01:23.382
cmd: “C:\Windows\System32\DeviceProperties.exe” “USB\VID_0547&PID_1002\6&30FA7FD6&0&3”
<<< Section end 2013/01/29 08:01:23.382
<<< [Exit status: SUCCESS (DI_DO_DEFAULT)]
>>> [DIF_TROUBLESHOOTER - USB\VID_0547&PID_1002\6&30FA7FD6&0&3]
>>> Section start 2013/01/29 08:01:24.814
cmd: “C:\Windows\System32\DeviceProperties.exe” “USB\VID_0547&PID_1002\6&30FA7FD6&0&3”
<<< Section end 2013/01/29 08:01:24.816
<<< [Exit status: SUCCESS (DI_DO_DEFAULT)]
>>> [Build Driver List - USB\VID_0547&PID_1002\6&30FA7FD6&0&3]
>>> Section start 2013/01/29 08:01:49.601
cmd: “C:\Windows\System32\DeviceProperties.exe” “USB\VID_0547&PID_1002\6&30FA7FD6&0&3”
cpy: Policy is set to make all digital signatures equal.
<<< Section end 2013/01/29 08:01:49.601
<<< [Exit status: SUCCESS]
>>> [Build Driver List - USB\VID_0547&PID_1002\6&30FA7FD6&0&3]
>>> Section start 2013/01/29 08:01:49.606
cmd: “C:\Windows\System32\DeviceProperties.exe” “USB\VID_0547&PID_1002\6&30FA7FD6&0&3”
cpy: Policy is set to make all digital signatures equal.
<<< Section end 2013/01/29 08:01:49.610
<<< [Exit status: SUCCESS]
>>> [DIF_SELECTBESTCOMPATDRV - USB\VID_0547&PID_1002\6&30FA7FD6&0&3]
>>> Section start 2013/01/29 08:01:49.610
cmd: “C:\Windows\System32\DeviceProperties.exe” “USB\VID_0547&PID_1002\6&30FA7FD6&0&3”
! dvi: Selecting driver failed(0xe0000228)
! dvi: Default installer: failed!
<<< Section end 2013/01/29 08:01:49.611
<<< [Exit status: FAILURE(0xe0000228)]
Thanks
—
NTDEV is sponsored by OSR
OSR is HIRING!! See http://www.osr.com/careers
For our schedule of WDF, WDM, debugging and other seminars visit:
http://www.osr.com/seminars
To unsubscribe, visit the List Server section of OSR Online at http://www.osronline.com/page.cfm?name=ListServer</mailto:xxxxx></mailto:xxxxx>
Thanks
But I don’t understand what it means.
So I have to change something in the driver because I can’t change in the card.
The driver source code is the microsoft one .
I suppose I have to replace
%Fx2HidDeviceName%=Fx2Hid_Install, HID\VID_0547&PID_1002&Col03
%Fx2HidDeviceName%=Fx2Hid_Install, HID\VID_0547&PID_1002
by
%Fx2HidDeviceName%=Fx2Hid_Install, USB\VID_0547&PID_1002&Col03
%Fx2HidDeviceName%=Fx2Hid_Install, USB\VID_0547&PID_1002
I make a try
Thanks
Same result if I make the change .
You need to understand what infs do before tying to brute force your way through this.
d
From: xxxxx@gmail.commailto:xxxxx
Sent: ?1/?28/?2013 11:21 PM
To: Windows System Software Devs Interest Listmailto:xxxxx
Subject: RE:[ntdev] OSR FX2 and WDK sample
Thanks
But I don’t understand what it means.
So I have to change something in the driver because I can’t change in the card.
The driver source code is the microsoft one .
I suppose I have to replace
%Fx2HidDeviceName%=Fx2Hid_Install, HID\VID_0547&PID_1002&Col03
%Fx2HidDeviceName%=Fx2Hid_Install, HID\VID_0547&PID_1002
by
%Fx2HidDeviceName%=Fx2Hid_Install, USB\VID_0547&PID_1002&Col03
%Fx2HidDeviceName%=Fx2Hid_Install, USB\VID_0547&PID_1002
I make a try
Thanks
—
NTDEV is sponsored by OSR
OSR is HIRING!! See http://www.osr.com/careers
For our schedule of WDF, WDM, debugging and other seminars visit:
http://www.osr.com/seminars
To unsubscribe, visit the List Server section of OSR Online at http://www.osronline.com/page.cfm?name=ListServer</mailto:xxxxx></mailto:xxxxx>
Ok you’re right I’m a little bit brutal.
I’ve found some explanation on the net , but do you have a fantastic link to help me ?
Is there some seminar in Europe : France for example ?
Thanks you