Quing,
The following works for NT4. The process is similar for Win2k. You’ll need
Loop.sys from your NT media. I included bind.inf and loop.inf (the oemsetup
for the loopback adapter).
This will add the loopback adapter:
setup /f /i%systemroot%\system32\ncpashel.inf /T NTN_InstallMode =
install /T NTN_InfOption = %DRIVER% /T NTN_Origination = install /T
NTN_Infname = %SRCDIR%%INFNAME% /T NTN_SRCPATH = %SRCDIR%
You will then need to rebind the adapter using the following command line:
setup /f /i%systemroot%\system32\ncpashel.inf /T NTN_InstallMode = Install
/T NTN_Oringination = install /T NTN_Infname =
%BUILDDIR%\drivers\batches\bind.inf
Network drivers are unique to other drivers in they need to go through the
Network Control Panel Applet (NCPA). This is actually the easier of
installing the driver types. Have you been abled to automate any of the
other driver installations?
Yousef Hamade
xxxxx@fmr.com
<----------- begin bind.inf----------- >
[InstallOption]
Set DtMode = NCPA
LibraryProcedure StartResult $(!NCPA_HANDLE),CPlSetup $(!STF_HWND),
$(DtMode)
exit
<----------- end bind.inf ----------- >
< ----------- begin loop.inf -------------->
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
MCA
“Jazz-Internal Bus”
[Options]
LOOP
[FileConstants]
UtilityInf = “UTILITY.INF”
ParamInf = “NCPARAM.INF”
subroutineinf = “SUBROUTN.INF”
SoftwareType = “driver”
Exit_Code = 0
NetEventDLL = “%SystemRoot%\System32\netevent.dll”
IoLogMsgDLL = “%SystemRoot%\System32\IoLogMsg.dll”
Manufacturer = “Microsoft”
ProductMajorVersion = “4”
ProductMinorVersion = “0”
ProductVersion = $(ProductMajorVersion)“.”$(ProductMinorVersion)
ProductSoftwareName = “NDISLoop”
ProductSoftwareImagePath = “\SystemRoot\System32\drivers\loop.sys”
NetRuleSoftwareType = “loopSys ndisDriver loopDriver”
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = “”“LoopSys”" yes no container"
NetRuleSoftwareClass = {“loopDriver basic”}
NetRuleSoftwareBindable = {“loopDriver loopAdapter non exclusive 100”}
ProductHardwareName = “NDISLoop”
NetRuleHardwareType = “loop loopAdapter”
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {“loopAdapter basic”}
ProductOpSupport = 134
ProductKeyName =
$(!NTN_SoftwareBase)“"$(Manufacturer)”"$(ProductSoftwareName)“\CurrentVers
ion”
ParamKeyName = $(!NTN_ServiceBase)“"$(ProductHardwareName)”\Parameters"
[GeneralConstants]
from = “”
to = “”
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = “”
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = “”
KeyParameters = “”
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = “Active”
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #(“Source Media Descriptions”, 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == “”
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = “\n”
set !STF_DISPLAYDEBUGOUTPUT = 1
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == “NCPA”
set Continue = $(OK)
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set CommonStatus = STATUS_REBOOT
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output “Cannot configure the Loopback driver software.”
Shell
$(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “ShellCode error: cannot get an error string.”
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
set MediaList = {“802.3”,“802.5”,“Fddi”}
set MediaChoice = *($(MediaList),1)
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
OpenRegKey $(!REG_H_LOCAL) “” $(ProductKeyName) $(MAXIMUM_ALLOWED)
KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “ShellCode error: cannot get an error string.”
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “ShellCode error: cannot get an error string.”
goto ShellCodeError
endif
ifstr(i) $($R1) != “OK”
set CommonStatus = STATUS_USERCANCEL
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
goto adapteroptions
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) “” $(!NTN_RegBase) $(MAXIMUM_ALLOWED)
KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output “Cannot find component product key”
goto fatalregistry
Endif
Endif
Debug-Output “INF: Shelling to FindService”
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “INF: FindService shell failure”
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output “Cannot find component service”
goto fatalregistry
endif
set OldVersionExisted = $(TRUE )
set ValueName = “”
set ValueData = “”
set ValueStr = “”
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == “Medium”
ifint $(ValueData) == “1”
set MediaChoice = *($(MediaList),2)
else-ifint $(ValueData) == “2”
set MediaChoice = *($(MediaList),3)
else
set MediaChoice = *($(MediaList),1)
endif
endif
EndForListDo
adapteroptions = +
set from = adapteroptions
ifstr(i) $(!STF_INSTALL_MODE) == EXPRESS
set MediaChoice = *($(MediaList),1)
else
read-syms FileDependentDlg$(!STF_LANGUAGE)
ui start “InputDlg”
ifstr(i) $(DLGEVENT) == “CONTINUE”
set MediaChoice = $(Combo1Out)
ui pop 1
else-ifstr(i) $(DLGEVENT) == “BACK”
set CommonStatus = STATUS_USERCANCEL
Debug-Output “OEMNADLB.INF: Action: exit. Bye.”
ui pop 1
goto end
else
ui pop 1
Debug-Output “OEMNADLB.INF: Action: unknown. Bye.”
goto end
endif
endif
Debug-Output "OEMNADLB.INF: setting media choice to: "$(MediaChoice)
skipoptions = +
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
Ifint $(OldVersionExisted) != $(FALSE)
Goto installhardware
Endif
ifstr(i) $(!NTN_InstallMode) == “install”
Ifstr(i) $(DoCopy) == “YES”
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString “ASK_SOURCE_FAIL”
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install “Install-Option”
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString “UNABLE_COPY_FILE”
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareName), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), “kernel”, “NDIS”, {}, “”,+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “ShellCode error”
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output “Registry error: add software components”
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalregistry
endif
set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList =
{{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “ShellCode error.”
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output “Resgitry error: add value list.”
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
set NewValueList =
{{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “ShellCode error.”
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output “Resgitry error: add value list.”
goto fatalregistry
endif
installhardware =+
Shell $(UtilityInf), AddHardwareComponent,
$(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS),
$(!NTN_SoftwareBase)“\Microsoft\Windows
NT\CurrentVersion\NetworkCards"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “Cannot add hardware component”
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output “Registry error: add hardware component”
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList =
{{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),”[“$($R4)”]
"$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “ShellCode error”
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = “”“”$(ProductHardwareName)$(AdapterNumber)“”“”
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList =
{{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)},
+
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “ShellCode error.”
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output “Registry error: add value list.”
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
writeparameters = +
ifstr(i) $(MediaChoice) == “802.5”
set MediaValue = 1
else-ifstr(i) $(MediaChoice) == “Fddi”
set MediaValue = 2
else
set MediaValue = 0
endif
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “ShellCode error.”
goto ShellCodeError
endif
set-add MediaType = $(MediaValue),1
set NewValueList = {+
{Medium,$(NoTitle),$(!REG_VT_DWORD),$(MediaValue)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),$(MediaType)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifstr(i) $(!STF_GUI_UNATTENDED) == “YES”
Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
endif
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “ShellCode error.”
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output “Registry error: Add value list”
goto fatalregistry
endif
EndWait
goto successful
bindingadapter =+
set Error = “Binding: Sorry, not yet implemented.”
goto fatal
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “ShellCode error”
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “ShellCode error”
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
UpgradeSoftware = +
OpenRegKey $(!REG_H_LOCAL) “” $(ProductKeyName) $(MAXIMUM_ALLOWED)
KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
install “Install-Update”
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct)
{MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct)
{MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
OpenRegKey $(!REG_H_LOCAL) “”
$(!NTN_ServiceBase)“"$(ProductHardwareName)”\Linkage" $(MAXIMUM_ALLOWED)
LinkageKey
ifstr(i) $(LinkageKey) != “”
GetRegValue $(LinkageKey) Bind BindInfo
ForListDo *($(BindInfo),4)
Split-String $($) “" CardInfo
QueryListSize CardPos $(CardInfo)
OpenRegKey $(!REG_H_LOCAL) “”
$(!NTN_ServiceBase)”"*($(CardInfo),$(CardPos))“\Parameters”
$(MAXIMUM_ALLOWED) ParamKey
ifstr $(ParamKey) != “”
GetRegValue $(ParamKey) “Medium” MediumInfo
set-add MediaType = *($(MediumInfo),4),1
SetRegValue $(ParamKey)
{MediaType,$(NoTitle),$(!REG_VT_DWORD),$(MediaType)}
CloseRegKey $(ParamKey)
endif
EndForListDo
CloseRegKey $(LinkageKey)
endif
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
set iSearch = 1
nextnetcard = +
Shell $(UtilityInf), FindNextNetworkCard, $(ProductHardwareName),
$(iSearch)
set KeyNetcard = $($R0)
set iSearch = $($R1)
Debug-Output “OemNadEp.Inf: FindNextNetworkCard
“$(KeyNetcard)”,”$(iSearch)
Ifstr $(KeyNetcard) != $(KeyNull)
Debug-Output “OemNadEp.Inf: Setting OperationsSupport value”
SetRegValue $(KeyNetcard)
{OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)}
CloseRegKey $(KeyNetcard)
goto nextnetcard
Endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “ShellCode error”
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “ShellCode error”
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), “WARNING”,
$(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == “OK”
goto $(to)
else-ifstr(i) $($R1) == “CANCEL”
goto $(from)
else
goto “end”
endif
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == “”
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString “SETUP_FAIL”
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity),
$(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == “OK”
goto $(from)
else
goto “end”
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
ifstr(i) $(Error) == “”
Shell $(UtilityInf) RegistryErrorString “SETUP_FAIL”
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output “ShellCode error: cannot get an error string.”
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), “FATAL”, $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = “MessageBox”
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start “Error Message”
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[Install-Option]
set STF_VITAL = “”
ifstr(i) $(AddCopy) == “YES”
AddSectionFilesToCopyList Files-$(Option) $(SrcDir)
$(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == “YES”
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = “”
set STF_OVERWRITE = “VERIFYSOURCEOLDER”
AddSectionFilesToCopyList Files-$(Option) $(SrcDir)
$(!STF_WINDOWSSYSPATH)\drivers
exit
[Source Media Descriptions]
1 = “Windows NT Workstation CD-ROM” , TAGFILE = cdrom_w.40
[Signature]
FileType = MICROSOFT_FILE
[GetSignature]
read-syms Signature
return $(FileType)
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
2, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
[Files-LOOP]
1,LOOP.SYS , SIZE=999
[LanguagesSupported]
ENG
[OptionsTextENG]
LOOP = “MS Loopback Adapter”
[FileConstantsENG]
ProCaption = “Windows NT Setup”
ProCancel = “Cancel”
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
“Are you sure you want to cancel copying files?”
ProCancelCap = “Network Setup Message”
ProText1 = “Copying:”
ProText2 = “To:”
FunctionTitle = “MS Loopback Adapter Card Setup”
ProductSoftwareDescription = “MS Loopback Adapter Driver”
ProductHardwareDescription = “MS Loopback Adapter”
ProductSoftwareTitle = “MS Loopback Adapter Driver”
ProductHardwareTitle = “MS Loopback Adapter”
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = “Shell Code Error.”
[DialogConstantsENG]
Help = “&Help”
Exit = “Cancel”
OK = “OK”
HelpContext = “”
Continue = “Continue”
Cancel = “Cancel”
[FileDependentDlgENG]
DlgType = “MultiCombo”
DlgTemplate = “SINGLE_COMBO”
Label1 = “&Frame Type:”
Caption = $(FunctionTitle)
Combo1List = $(MediaList)
Combo1Out = $(MediaChoice)
ComboListItemsIn = {Combo1List}
ComboListItemsOut = {Combo1Out}
HelpContext = $(!IDH_DB_OEMNADLB_INS)
< ----------- end loop.inf ----------- >
You are currently subscribed to ntdev as: $subst(‘Recip.EmailAddr’)
To unsubscribe send a blank email to leave-ntdev-$subst(‘Recip.MemberIDChar’)@lists.osr.com