The free OSR Learning Library has more than 50 articles on a wide variety of topics about writing and debugging device drivers and Minifilters. From introductory level to advanced. All the articles have been recently reviewed and updated, and are written using the clear and definitive style you've come to expect from OSR over the years.
Check out The OSR Learning Library at: https://www.osr.com/osr-learning-library/
I am trying to figure out how to run the virtual com UMDF example “VirtualSerial2um” provided on the WinDDK GitHubPage: https://github.com/microsoft/Windows-driver-samples/tree/main/serial/VirtualSerial2
For doing so I’ve installed VS2022,WinSDK and WinDDK on 2 WIN10 PC to have one as the host and the other one as the target computer accordingly to steps listed here: https://learn.microsoft.com/en-us/windows-hardware/drivers/gettingstarted/provision-a-target-computer-wdk-8-1
Then I opened the example project provided on the GitHub page in VS2022 and rebuild everything – as this failed with the error “virtualSerial” is reserved I changed the
[VirtualSerial_Install.NT.Wdf] UmdfService = VirtualSerial2um, VirtualSerial_Install UmdfServiceOrder = VirtualSerial2um
And then I hit F5 and after choosing the IP Address of the target computer the Device Configuration take place and ended with
[15:42:30:064]: Task "Creating system restore point" completed successfully Progress event: Current: 16, Max: 16, Message: " Task "Creating system restore point" completed successfully" Result completed Test process exit code: 0
Then I followed the recommendation found here
– particularly in the post of Kaplan – however still not solved the “DbgengRemoteCommand is missing” problem. Guess I missed something important - would be glad if someone could point me into the right direction.
|Upcoming OSR Seminars
|OSR has suspended in-person seminars due to the Covid-19 outbreak. But, don't miss your training! Attend via the internet instead!
|13-17 May 2024
|1-5 Apr 2024
|Internals & Software Drivers
|11-15 Mar 2024
|Writing WDF Drivers
|20-24 May 2024