The free OSR Learning Library has more than 50 articles on a wide variety of topics about writing and debugging device drivers and Minifilters. From introductory level to advanced. All the articles have been recently reviewed and updated, and are written using the clear and definitive style you've come to expect from OSR over the years.
Check out The OSR Learning Library at: https://www.osr.com/osr-learning-library/
I am converting a working DOS driver that services interrupts every 100us. I have the code functioning as a Windows driver, but it is way too slow.
I'm not currently doing anything with user mode. I am just catching an interrupt, setting up for the next interrupt, and returning TRUE (interrupt was serviced).
Timing (measured with KeQueryPerformanceCounter with 10Mhz / 100ns granularity) shows I get in and out of the ISR in 9.5us. There is no DPC. The time events are logged to an array then analyzed after 5,000 interrupts. Reading the timer itself I measured takes ~150ns, so I don't expect this impacts my measurements.
Timing the entries to the ISR defined by IoConnectInterrupt() shows I am getting an interrupt approximately every 1.6ms rather than at the 100us rate I am expecting them. This is very consistent and the delays are not happening in bursts. I've tried different CPUs with very different clock rates, and the 1.6ms rate remains consistent.
My driver is sending and receiving a small packet of data by DMA. Received DMA causes the interrupt. I based the design on a WDF DMA sample. The data being transferred is all in the extension and is not using user buffers, so I removed the buffer allocation and queuing that came in the sample. The data is arriving and looks correct.
Is there something I need to do to tickle the operating system to make these interrupts arrive faster?
|Upcoming OSR Seminars|
|OSR has suspended in-person seminars due to the Covid-19 outbreak. But, don't miss your training! Attend via the internet instead!|
|Writing WDF Drivers||12 September 2022||Live, Online|
|Internals & Software Drivers||23 October 2022||Live, Online|
|Kernel Debugging||14 November 2022||Live, Online|
|Developing Minifilters||5 December 2022||Live, Online|