The free OSR Learning Library has more than 50 articles on a wide variety of topics about writing and debugging device drivers and Minifilters. From introductory level to advanced. All the articles have been recently reviewed and updated, and are written using the clear and definitive style you've come to expect from OSR over the years.
Check out The OSR Learning Library at: https://www.osr.com/osr-learning-library/
I'm porting a legacy filter driver that does File Encryption to minifilter.
Lately I started using Driver Verifier (the old legacy driver failed passing it). I went solving various problems thanks to it.
But I'm stuck on this one, I've disabled all my FLT_OPERATION_REGISTRATION Callbacks so now I'm not filtering any I/Os and while I shutdown the computer this message appears :
FILTER VERIFIER WARNING: A filter has set a completion context for a callback data which will be lost. Probable cause of this is that no post-operation callback was requested or routine was registered for this operation or the request was being pended or completed. (Filter = FFFFC902E4C59010 (driver_name_here), Cbd = FFFFC902E8705998) Break, ignore, zap or remove ?
In windbg I can print the FLT_CALLBACK_DATA structure and the FLT_IO_PARAMETER_BLOCK and the IO_STATUS_BLOCK :
kd> dt !_flt_callback_data FFFFC902E8705998 FLTMGR!_FLT_CALLBACK_DATA +0x000 Flags : 2 +0x008 Thread : 0xffffc902`e7f40040 _KTHREAD +0x010 Iopb : 0xffffc902`e87059f0 _FLT_IO_PARAMETER_BLOCK +0x018 IoStatus : _IO_STATUS_BLOCK +0x028 TagData : (null) +0x030 QueueLinks : _LIST_ENTRY [ 0x00000000`00000000 - 0x00000000`00000000 ] +0x040 QueueContext :  (null) +0x030 FilterContext :  (null) +0x050 RequestorMode : 0 '' kd> dx -id 0,0,ffffc902e2aaf080 -r1 ((FLTMGR!_FLT_IO_PARAMETER_BLOCK *)0xffffc902e87059f0) ((FLTMGR!_FLT_IO_PARAMETER_BLOCK *)0xffffc902e87059f0) : 0xffffc902e87059f0 [Type: _FLT_IO_PARAMETER_BLOCK *] [+0x000] IrpFlags : 0x0 [Type: unsigned long] [+0x004] MajorFunction : 0x10 [Type: unsigned char] [+0x005] MinorFunction : 0x0 [Type: unsigned char] [+0x006] OperationFlags : 0x0 [Type: unsigned char] [+0x007] Reserved : 0x0 [Type: unsigned char] [+0x008] TargetFileObject : 0x0 [Type: _FILE_OBJECT *] [+0x010] TargetInstance : 0xffffc902e69c1010 [Type: _FLT_INSTANCE *] [+0x018] Parameters [Type: _FLT_PARAMETERS] kd> dx -id 0,0,ffffc902e2aaf080 -r1 (*((FLTMGR!_IO_STATUS_BLOCK *)0xffffc902e87059b0)) (*((FLTMGR!_IO_STATUS_BLOCK *)0xffffc902e87059b0)) [Type: _IO_STATUS_BLOCK] [+0x000] Status : -1 [Type: long] [+0x000] Pointer : 0xffffffff [Type: void *] [+0x008] Information : 0x0 [Type: unsigned __int64]
But they are quite empty...
And since I'm not filtering any I/Os where can I be using a FLT_CALLBACK_DATA ?
Without Driver Verifier it goes to shutdown normally (no BSOD or freezes).
If anybody has ever encountered this message ... any help appreciated !
(I also registered some callback in pDriverObject->MajorFunction to communicate with the driver, but I don't think it can come from this).
|Upcoming OSR Seminars|
|OSR has suspended in-person seminars due to the Covid-19 outbreak. But, don't miss your training! Attend via the internet instead!|
|Writing WDF Drivers||24 January 2022||Live, Online|
|Internals & Software Drivers||7 February 2022||Live, Online|
|Kernel Debugging||21 March 2022||Live, Online|
|Developing Minifilters||23 May 2022||Live, Online|