Hi All,
I am facing a issue sometimes while running the load my system hangs up
and i m left with no other option except to power off the machine. I have
got a Intel Xeon dual processor m/c on which Driver Verifier with Special
pool, Low Resource simulation, Pool Tracking, I/O verification option is
also configured for my driver. Compuware Driver Studio’s Softice is also
enabled on the m/c but only after a few minutes of the load my m/c hangs up.
I don’t find any clue to resolve the problem as neither the crash dump is
generated to debug nor softice traps the error.
Plz suggest me the solution to resolve the issue.
Regards,
Arvind.
I would suggest the following.
Break into the system when it is hung and grovel through the threads and see
if there is a deadlock occurring. This would be the first thing I would do.
I am not familiar with SoftIce but if they have the equivalent of the !locks
command found in WinDbg it will make things much easier.
Pete
Kernel Drivers
Windows Filesystem and Device Driver Consulting
www.KernelDrivers.com
(303)546-0300
-----Original Message-----
From: xxxxx@lists.osr.com
[mailto:xxxxx@lists.osr.com] On Behalf Of Arvind
Sent: Thursday, July 28, 2005 7:38 AM
To: Kernel Debugging Interest List
Subject: [windbg] System hangs up…
Hi All,
I am facing a issue sometimes while running the load my system hangs up
and i m left with no other option except to power off the machine. I have
got a Intel Xeon dual processor m/c on which Driver Verifier with Special
pool, Low Resource simulation, Pool Tracking, I/O verification option is
also configured for my driver. Compuware Driver Studio’s Softice is also
enabled on the m/c but only after a few minutes of the load my m/c hangs up.
I don’t find any clue to resolve the problem as neither the crash dump is
generated to debug nor softice traps the error.
Plz suggest me the solution to resolve the issue.
Regards,
Arvind.
You are currently subscribed to windbg as: xxxxx@kerneldrivers.com
To unsubscribe send a blank email to xxxxx@lists.osr.com
Hi,
And try to findout if there is an CPU microcode patch for your CPU.
If with !CPUINFO the Update Signature is al zeros, there usually is one.
D
From: “Arvind”
>Reply-To: “Kernel Debugging Interest List”
>To: “Kernel Debugging Interest List”
>Subject: [windbg] System hangs up…
>Date: Thu, 28 Jul 2005 19:07:49 +0530
>
>Hi All,
> I am facing a issue sometimes while running the load my system hangs
>up
>and i m left with no other option except to power off the machine. I have
>got a Intel Xeon dual processor m/c on which Driver Verifier with Special
>pool, Low Resource simulation, Pool Tracking, I/O verification option is
>also configured for my driver. Compuware Driver Studio’s Softice is also
>enabled on the m/c but only after a few minutes of the load my m/c hangs
>up.
>I don’t find any clue to resolve the problem as neither the crash dump is
>generated to debug nor softice traps the error.
> Plz suggest me the solution to resolve the issue.
>
> Regards,
> Arvind.
>
>
>—
>You are currently subscribed to windbg as: xxxxx@hotmail.com
>To unsubscribe send a blank email to xxxxx@lists.osr.com
_________________________________________________________________
MSN Search, for accurate results! http://search.msn.nl