Microsoft has done a sorry job of providing this sort of information.
Some of the information can be acessed using the Winsock WsControl function.
See the URL:
<www.cyberport.com>
for information and a Windows 9X sample.
PCAUSA also has a similar sample called “TDIQ”. It extends the idea to
Windows NT and Windows 2000 where WsControl does not exist. You can download
the TDIQ executables. However, the source is provided only as part of the
PCAUSA “Advanced TDI Samples for Windows NT”.
http:
You can also look at the Simple Network Management Protocol (SNMP) API. I
think that there may be some information on SNMP on the Winsock FAQ (above).
Good luck,
Thomas F. Divine
PCAUSA - Toolkits & Resources For Network Software Developers
NDIS Protocol - TDI Client - Windows 95 Redirector
http:
Thank you for reply…
That was very helpful…
I know that API… BUT That didn’t work Windows NT and Windows 95…
So… I wanna get SUCH that data base on NT/95 platform…
Thank YOU you regard…
> -----Original Message-----
> From: xxxxx@lists.osr.com
> [mailto:xxxxx@lists.osr.com]On Behalf Of Thomas F. Divine
> Sent: Tuesday, November 07, 2000 11:29 AM
> To: NT Developers Interest List
> Subject: [ntdev] Re: [Q] about Network Start Detection & Notify
> Dynamic Network Information
>
>
> You should take a look at the “IPHelper” API that is included in Windows
> 2000 and in some Windows NT service packs. I believe that it is documented
> in the Microsoft "Platform SDK. The Platform SDK probably is where the
> necessary header files and import libraries can be found.
>
> Good luck,
>
> Thomas F. Divine
>
> PCAUSA - Toolkits & Resources For Network Software Developers
> NDIS Protocol - TDI Client - Windows 95 Redirector
>
>
> ----- Original Message -----
> From: ???±?
> To: NT Developers Interest List
> Sent: Monday, November 06, 2000 8:42 PM
> Subject: [ntdev] [Q] about Network Start Detection & Notify
> Dynamic Network
> Information
>
>
> >
> > Hi~ there~
> >
> > How are U all , I have something ask about Network.
> >
> > Now Am develope something about Network App… base on Windows
> > 98/95…more over NT
> > But I had BIG problem …
> >
> > How can I get information of Dial UP Network starting … and
> > Network information ( like DNS server, IP Address, Netmask,
> Gateway…)
> > I was use “ipconfig” source in SDK But… It didn’t work windows
> > 95 and NT…
> > I wanna get common method to get such that information…
> >
> > Thank you for your regard…
> >
> > God bless you all…
> > b<?箷 ????&vڵ?j?S?z-?Ƣd?{n???zwnV’?S[.?z{z?۲?
> >
>
>
> —
> You are currently subscribed to ntdev as: xxxxx@orgio.net
> To unsubscribe send a blank email to $subst(‘Email.Unsub’)
b???v?jSz???n?zn’S.zzಲ</http:></http:></www.cyberport.com>