Re: OT Are there any special settings in a Dell Optiplex Gx150 tower that enable pci slot 3 or

“Fernando, Robert” wrote in message
news:xxxxx@ntdev…
>
> Hi all,
> Are there any special settings in a Dell Optiplex Gx150 tower that enable
> pci slot 3 or 4
>
> I know the cards we are trying to use in the PC all work correctly, but
fail
> to work if inserted into pci slot 3 or 4

I don’t have a conclusive answer, though I’ve seen that problem with my own
Gx150. I did find that if I don’t leave any empty slots below those odd
ones, it seems to work, though I haven’t exhaustively tested it. Once I had
a config that worked, I just used it.

If you find a definitive answer, please let me know.

Phil

Philip D. Barila
Seagate Technology, LLC
(720) 684-1842

I have seen problems on computers where certain cards, like video, had to be
in a primary pci slot- not behind a bridge. Problem was that you didn’t
know which slots were primary and which secondary, it was just trial and
error, like Phil said. There was one time I was fortunate enough to know
one of the engineers that had worked on a particular platform, so he was
able to tell me what was what. I have also seen problems with the pci bus
not supporting a 3.3v card, and that looks like a dead card too.

andy

-----Original Message-----
From: xxxxx@lists.osr.com
[mailto:xxxxx@lists.osr.com]On Behalf Of Phil Barila
Sent: Wednesday, April 24, 2002 2:31 PM
To: NT Developers Interest List
Subject: [ntdev] Re: OT Are there any special settings in a Dell
Optiplex Gx150 tower that enable pci slot 3 or 4?

“Fernando, Robert” wrote in message
news:xxxxx@ntdev…
>
> Hi all,
> Are there any special settings in a Dell Optiplex Gx150 tower that enable
> pci slot 3 or 4
>
> I know the cards we are trying to use in the PC all work correctly, but
fail
> to work if inserted into pci slot 3 or 4

I don’t have a conclusive answer, though I’ve seen that problem with my own
Gx150. I did find that if I don’t leave any empty slots below those odd
ones, it seems to work, though I haven’t exhaustively tested it. Once I had
a config that worked, I just used it.

If you find a definitive answer, please let me know.

Phil

Philip D. Barila
Seagate Technology, LLC
(720) 684-1842


You are currently subscribed to ntdev as: xxxxx@charter.net
To unsubscribe send a blank email to %%email.unsub%%