Please help me : WDK installation failed in Windows XP

NTDEV
1

Hi All

I am new to the Windows Driver Development.

I have downloaded the 6.1.6001.18002.081017-1400_wdksp-WDK18002SP_EN_DVD.iso from connect website

I burned 6.1.6001.18002.081017-1400_wdksp-WDK18002SP_EN_DVD.iso to CD and tried to install on Windows XP SP2.
But after installing some components KitSetup.exe shows an error with “installed
subcomponents that are not needed by any of your configured kit components…”.

I pressed ‘OK’ for this after reading the information message on the KitSetup’s right side.It says it will remove these components and rerun will solve the problem.

But I tried it again…but no use…

Please help me…

Rgds
Syam

**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
for the use of the addressee(s). If you are not the intended recipient, please
notify the sender by e-mail and delete the original message. Further, you are not
to copy, disclose, or distribute this e-mail or its contents to any other person and
any such actions are unlawful. This e-mail may contain viruses. Infosys has taken
every reasonable precaution to minimize this risk, but is not liable for any damage
you may sustain as a result of any virus in this e-mail. You should carry out your
own virus checks before opening the e-mail or attachment. Infosys reserves the
right to monitor and review the content of all messages sent to or from this e-mail
address. Messages sent to or from this e-mail address may be stored on the
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***

2

I’ve had that happen to me multiple times. Usually, removing the product
completely (including the Windows Debuggers) and then attempting to
reinstall have solved the problems.

From: xxxxx@lists.osr.com
[mailto:xxxxx@lists.osr.com] On Behalf Of Syam S Nair
Sent: 30. april 2009 10:16
To: Windows System Software Devs Interest List
Subject: [ntdev] Please help me : WDK installation failed in Windows XP

Hi All

I am new to the Windows Driver Development.

I have downloaded the 6.1.6001.18002.081017-1400_wdksp-WDK18002SP_EN_DVD.iso
from connect website

I burned 6.1.6001.18002.081017-1400_wdksp-WDK18002SP_EN_DVD.iso to CD and
tried to install on Windows XP SP2.

But after installing some components KitSetup.exe shows an error with
“installed
subcomponents that are not needed by any of your configured kit
components…”.

I pressed ‘OK’ for this after reading the information message on the
KitSetup’s right side.It says it will remove these components and rerun will
solve the problem.

But I tried it again.but no use…

Please help me…

Rgds

Syam

NTDEV is sponsored by OSR

For our schedule of WDF, WDM, debugging and other seminars visit:
http://www.osr.com/seminars

To unsubscribe, visit the List Server section of OSR Online at
http://www.osronline.com/page.cfm?name=ListServer

**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely

for the use of the addressee(s). If you are not the intended recipient,
please
notify the sender by e-mail and delete the original message. Further, you
are not
to copy, disclose, or distribute this e-mail or its contents to any other
person and
any such actions are unlawful. This e-mail may contain viruses. Infosys has
taken
every reasonable precaution to minimize this risk, but is not liable for any
damage
you may sustain as a result of any virus in this e-mail. You should carry
out your
own virus checks before opening the e-mail or attachment. Infosys reserves
the
right to monitor and review the content of all messages sent to or from this
e-mail
address. Messages sent to or from this e-mail address may be stored on the
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***

3

I think you can ‘fix’ this by first installing the most recent version of .NET, whatever that is.
The reason that ‘fix’ is in quotes is because, in my experience, pretty much every time I am forced
to upgrade .NET, something breaks.

Good luck,

mm

Syam S Nair wrote:

Hi All

I am new to the Windows Driver Development.

I have downloaded the
6.1.6001.18002.081017-1400_wdksp-WDK18002SP_EN_DVD.iso from connect website

I burned 6.1.6001.18002.081017-1400_wdksp-WDK18002SP_EN_DVD.iso to CD
and tried to install on Windows XP SP2.

But after installing some components KitSetup.exe shows an error with
“*installed
subcomponents that are not needed by any of your configured kit
components……”.*

I pressed ‘OK’ for this after reading the information message on the
KitSetup’s right side.It says it will remove these components and rerun
will solve the problem.

But I tried it again…but no use….

Please help me….

Rgds

Syam

**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
for the use of the addressee(s). If you are not the intended recipient, please
notify the sender by e-mail and delete the original message. Further, you are not
to copy, disclose, or distribute this e-mail or its contents to any other person and
any such actions are unlawful. This e-mail may contain viruses. Infosys has taken
every reasonable precaution to minimize this risk, but is not liable for any damage
you may sustain as a result of any virus in this e-mail. You should carry out your
own virus checks before opening the e-mail or attachment. Infosys reserves the
right to monitor and review the content of all messages sent to or from this e-mail
address. Messages sent to or from this e-mail address may be stored on the
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***

4

Did you manage to install it? Could you please give me some tips, as I’m experiencing the same issues.

Alexandra from NTT DATA

5

Sigh. You are responding to a ten year old post by somebody who is no longer a member. Think he’s gonna reply?

I don’t.

Please do no reply to old posts.

Thread closed.