HCT 11.2 Driver Verifier Test : Fail in PMTE

Hi All,

I got a problem during my NDIS Mux Intermediate driver testing with HCT 11.2 kit in Driver Verifier Test. In this test there is four subtests.

  1. NDIS Test
  2. NDIS(IPSec) Test
  3. ACPI S1 Stress Test
  4. Driver Enable/Disable Test

NDIS test and NDIS(IPSec) tests are pass. But during ACPT Test -it will fail with PMTE test. I attach that log below. I use Windows XP OS.

For hardware requirement, Is there require S1,S2,S3 or S4 support in my Hardware Bios. Which way I come to know that my motherboard support S1,
S2,S3 or S4 ? Is there any additional setting require related to IP Addres binding with server and test system. Now I had prepare my Test setup as per detail
given in HCT Documentation. Please tell me if there power management related setting require.

Can you help me if you have any solution for above test problem.

Thanks in advance.

Amit Dhaduk

Log ::
+====================================================================+
Log header
+====================================================================+

===========================================
VARIATION 1 START
Start

FAILURE: couldn’t find device with PNPID= ROOT\MS_MUXMP\0001
??w?5

VARIATION 1:FAIL
Elapsed Time: Days 0 Hours 0 Minutes 0 Seconds 3


NTLOG REPORT

Tests Total 0 | Variations Total 1

Tests Passed 0 0 % | Variations Passed 0 0%
Tests Warned 0 0 % | Variations Warned 0 0%
Tests Failed sev3 0 0 % | Variations Failed sev3 1 100%
Tests Failed sev2 0 0 % | Variations Failed sev2 0 0%
Tests Failed sev1 0 0 % | Variations Failed sev1 0 0%
Tests Blocked 0 0 % | Variations Blocked 0 0%
Tests Aborted 0 0 % | Variations Aborted 0 0%