Anyone tried to install the beta of the above said product?
I downloaded the 2.5 GB monster twice, but don’t have a DVD burner, so I
instead tried to use virtual drive to emulate a DVD, insert the image and
install, but I always get the same errors “This installation package could
not be opened. Contact the application vendor to verify that this is a valid
windows installer package” when I click on setup.exe.
The installer.exe is different, it launches, and i get the screen with MS
.NET Framework 2.0 installer enabled ( I haven’t installed that on this PC
before). and MS SQL desktop engine enabled.
All others are disabled. I have already got IFS 3790 instaleld on this
machine.
Even clickiing on the enabled buttons wont install anything, neither would
navigating into the folder of .net installer and trying to run it from there
work.
The DVD wont even extract from explorer.
any clues?
–
I know nothing about 5484 but if you mean 5384 WDK, I have it installed from the image mounted by MS virtual CD driver with no problem. Try to check image integrity, I guess it is possible to compute checksum (MD5?) and compare with correct one but I never tried it.
Best regards,
Michal Vodicka
UPEK, Inc.
[xxxxx@upek.com, http://www.upek.com]
From: xxxxx@lists.osr.com[SMTP:xxxxx@lists.osr.com] on behalf of amitr0[SMTP:xxxxx@gmail.com]
Reply To: Windows System Software Devs Interest List
Sent: Wednesday, June 07, 2006 7:40 PM
To: Windows System Software Devs Interest List
Subject: [ntdev] 5484.4_WDK_B2
Anyone tried to install the beta of the above said product?
I downloaded the 2.5 GB monster twice, but don’t have a DVD burner, so I instead tried to use virtual drive to emulate a DVD, insert the image and install, but I always get the same errors “This installation package could not be opened. Contact the application vendor to verify that this is a valid windows installer package” when I click on setup.exe.
The installer.exe is different, it launches, and i get the screen with MS .NET Framework 2.0 installer enabled ( I haven’t installed that on this PC before). and MS SQL desktop engine enabled.
All others are disabled. I have already got IFS 3790 instaleld on this machine.
Even clickiing on the enabled buttons wont install anything, neither would navigating into the folder of .net installer and trying to run it from there work.
The DVD wont even extract from explorer.
any clues?
–
I had the same experience as Michal. I’ve installed into C:\WINDDK\5384;
side by side with the W2K3 SP1 IFS in C:\WINDDK\3790.1830.
“amitr0” wrote in message news:xxxxx@ntdev…
Anyone tried to install the beta of the above said product?
I downloaded the 2.5 GB monster twice, but don’t have a DVD burner, so I
instead tried to use virtual drive to emulate a DVD, insert the image and
install, but I always get the same errors “This installation package could
not be opened. Contact the application vendor to verify that this is a valid
windows installer package” when I click on setup.exe.
The installer.exe is different, it launches, and i get the screen with MS
.NET Framework 2.0 installer enabled ( I haven’t installed that on this PC
before). and MS SQL desktop engine enabled.
All others are disabled. I have already got IFS 3790 instaleld on this
machine.
Even clickiing on the enabled buttons wont install anything, neither would
navigating into the folder of .net installer and trying to run it from there
work.
The DVD wont even extract from explorer.
any clues?
–
- amitr0
I installed the ddk off of the winhec DVD and it installed without any
problems. It promptly broke some of my projects, but that is another story.
=====================
Mark Roddy DDK MVP
Windows 2003/XP/2000 Consulting
Hollis Technology Solutions 603-321-1032
www.hollistech.com
-----Original Message-----
From: xxxxx@lists.osr.com
[mailto:xxxxx@lists.osr.com] On Behalf Of Lyndon
J. Clarke
Sent: Thursday, June 08, 2006 3:08 AM
To: Windows System Software Devs Interest List
Subject: Re:[ntdev] 5484.4_WDK_B2
I had the same experience as Michal. I’ve installed into
C:\WINDDK\5384; side by side with the W2K3 SP1 IFS in
C:\WINDDK\3790.1830.
“amitr0” wrote in message news:xxxxx@ntdev…
> Anyone tried to install the beta of the above said product?
>
> I downloaded the 2.5 GB monster twice, but don’t have a DVD
> burner, so I instead tried to use virtual drive to emulate a
> DVD, insert the image and install, but I always get the same
> errors “This installation package could not be opened.
> Contact the application vendor to verify that this is a valid
> windows installer package” when I click on setup.exe.
>
> The installer.exe is different, it launches, and i get the
> screen with MS .NET Framework 2.0 installer enabled ( I
> haven’t installed that on this PC before). and MS SQL desktop
> engine enabled.
>
> All others are disabled. I have already got IFS 3790
> instaleld on this machine.
>
>
> Even clickiing on the enabled buttons wont install anything,
> neither would
> navigating into the folder of .net installer and trying to
> run it from there
> work.
>
>
> The DVD wont even extract from explorer.
>
> any clues?
>
>
>
> –
>
> - amitr0
>
>
>
> —
> Questions? First check the Kernel Driver FAQ at
> http://www.osronline.com/article.cfm?id=256
>
> To unsubscribe, visit the List Server section of OSR Online
> at http://www.osronline.com/page.cfm?name=ListServer
>
> I downloaded the 2.5 GB monster twice, but don’t have a DVD
burner, so I instead tried to use virtual drive to emulate a
DVD, insert the image and install, but I always get the same
errors “This installation package could not be opened.
Contact the application vendor to verify that this is a valid
windows installer package” when I click on setup.exe.
Maybe an idea : I expanded the complete iso image into a
subdirectory 5484.4_WDK_B2 with means of UltraISO and
did start the setup.exe from there . Everything ran fine.
Christiaan
----- Original Message -----
From: “Mark Roddy”
To: “Windows System Software Devs Interest List”
Sent: Thursday, June 08, 2006 1:11 PM
Subject: RE: [ntdev] 5484.4_WDK_B2
> I installed the ddk off of the winhec DVD and it installed without any
> problems. It promptly broke some of my projects, but that is another story.
>
> =====================
> Mark Roddy DDK MVP
> Windows 2003/XP/2000 Consulting
> Hollis Technology Solutions 603-321-1032
> www.hollistech.com
>
> > -----Original Message-----
> > From: xxxxx@lists.osr.com
> > [mailto:xxxxx@lists.osr.com] On Behalf Of Lyndon
> > J. Clarke
> > Sent: Thursday, June 08, 2006 3:08 AM
> > To: Windows System Software Devs Interest List
> > Subject: Re:[ntdev] 5484.4_WDK_B2
> >
> > I had the same experience as Michal. I’ve installed into
> > C:\WINDDK\5384; side by side with the W2K3 SP1 IFS in
> > C:\WINDDK\3790.1830.
> >
> > “amitr0” wrote in message news:xxxxx@ntdev…
> > Anyone tried to install the beta of the above said product?
> >
> > I downloaded the 2.5 GB monster twice, but don’t have a DVD
> > burner, so I instead tried to use virtual drive to emulate a
> > DVD, insert the image and install, but I always get the same
> > errors “This installation package could not be opened.
> > Contact the application vendor to verify that this is a valid
> > windows installer package” when I click on setup.exe.
> >
> > The installer.exe is different, it launches, and i get the
> > screen with MS .NET Framework 2.0 installer enabled ( I
> > haven’t installed that on this PC before). and MS SQL desktop
> > engine enabled.
> >
> > All others are disabled. I have already got IFS 3790
> > instaleld on this machine.
> >
> >
> > Even clickiing on the enabled buttons wont install anything,
> > neither would
> > navigating into the folder of .net installer and trying to
> > run it from there
> > work.
> >
> >
> > The DVD wont even extract from explorer.
> >
> > any clues?
> >
> >
> >
> > –
> >
> > - amitr0
> >
> >
> >
> > —
> > Questions? First check the Kernel Driver FAQ at
> > http://www.osronline.com/article.cfm?id=256
> >
> > To unsubscribe, visit the List Server section of OSR Online
> > at http://www.osronline.com/page.cfm?name=ListServer
> >
>
>
>
> —
> Questions? First check the Kernel Driver FAQ at http://www.osronline.com/article.cfm?id=256
>
> To unsubscribe, visit the List Server section of OSR Online at http://www.osronline.com/page.cfm?name=ListServer
>
Christiaan,
UltraISO was exactly what I was looking for. I had tried before with WinISO,
a similar product, however, it doesnt support DVDs, and also with Virtual
Drive to mount it.
But the Image properly extracts and installs with UltraISO.
Thanks for the cue.
amitr0
On 6/8/06, Christiaan Ghijselinck
wrote:
>
>
> > I downloaded the 2.5 GB monster twice, but don’t have a DVD
> > burner, so I instead tried to use virtual drive to emulate a
> > DVD, insert the image and install, but I always get the same
> > errors “This installation package could not be opened.
> > Contact the application vendor to verify that this is a valid
> > windows installer package” when I click on setup.exe.
> >
>
> Maybe an idea : I expanded the complete iso image into a
> subdirectory 5484.4_WDK_B2 with means of UltraISO and
> did start the setup.exe from there . Everything ran fine.
>
> Christiaan
>
>
>
>
> ----- Original Message -----
> From: “Mark Roddy”
> To: “Windows System Software Devs Interest List”
> Sent: Thursday, June 08, 2006 1:11 PM
> Subject: RE: [ntdev] 5484.4_WDK_B2
>
>
> > I installed the ddk off of the winhec DVD and it installed without any
> > problems. It promptly broke some of my projects, but that is another
> story.
> >
> > =====================
> > Mark Roddy DDK MVP
> > Windows 2003/XP/2000 Consulting
> > Hollis Technology Solutions 603-321-1032
> > www.hollistech.com
> >
> > > -----Original Message-----
> > > From: xxxxx@lists.osr.com
> > > [mailto:xxxxx@lists.osr.com] On Behalf Of Lyndon
> > > J. Clarke
> > > Sent: Thursday, June 08, 2006 3:08 AM
> > > To: Windows System Software Devs Interest List
> > > Subject: Re:[ntdev] 5484.4_WDK_B2
> > >
> > > I had the same experience as Michal. I’ve installed into
> > > C:\WINDDK\5384; side by side with the W2K3 SP1 IFS in
> > > C:\WINDDK\3790.1830.
> > >
> > > “amitr0” wrote in message news:xxxxx@ntdev…
> > > Anyone tried to install the beta of the above said product?
> > >
> > > I downloaded the 2.5 GB monster twice, but don’t have a DVD
> > > burner, so I instead tried to use virtual drive to emulate a
> > > DVD, insert the image and install, but I always get the same
> > > errors “This installation package could not be opened.
> > > Contact the application vendor to verify that this is a valid
> > > windows installer package” when I click on setup.exe.
> > >
> > > The installer.exe is different, it launches, and i get the
> > > screen with MS .NET Framework 2.0 installer enabled ( I
> > > haven’t installed that on this PC before). and MS SQL desktop
> > > engine enabled.
> > >
> > > All others are disabled. I have already got IFS 3790
> > > instaleld on this machine.
> > >
> > >
> > > Even clickiing on the enabled buttons wont install anything,
> > > neither would
> > > navigating into the folder of .net installer and trying to
> > > run it from there
> > > work.
> > >
> > >
> > > The DVD wont even extract from explorer.
> > >
> > > any clues?
> > >
> > >
> > >
> > > –
> > >
> > > - amitr0
> > >
> > >
> > >
> > > —
> > > Questions? First check the Kernel Driver FAQ at
> > > http://www.osronline.com/article.cfm?id=256
> > >
> > > To unsubscribe, visit the List Server section of OSR Online
> > > at http://www.osronline.com/page.cfm?name=ListServer
> > >
> >
> >
> >
> > —
> > Questions? First check the Kernel Driver FAQ at
> http://www.osronline.com/article.cfm?id=256
> >
> > To unsubscribe, visit the List Server section of OSR Online at
> http://www.osronline.com/page.cfm?name=ListServer
> >
>
> —
> Questions? First check the Kernel Driver FAQ at
> http://www.osronline.com/article.cfm?id=256
>
> To unsubscribe, visit the List Server section of OSR Online at
> http://www.osronline.com/page.cfm?name=ListServer
>
–
- amitr0