ramdisk driver for w2k

Hi,

Do you know whether there is ramdisk driver for w2k or not?

Any suggestions are appreciated!

Thank you!


Best Regards,
Steve Huang

Check out http://www.superspeed.com

----- Original Message -----
From: “Steve Huang”
To: “NT Developers Interest List”
Sent: Monday, March 13, 2000 2:50 AM
Subject: [ntdev] ramdisk driver for w2k

> Hi,
>
> Do you know whether there is ramdisk driver for w2k or not?
>
> Any suggestions are appreciated!
>
> Thank you!
>
> —
> Best Regards,
> Steve Huang
>
>
>
> —
> You are currently subscribed to ntdev as: xxxxx@timesn.com
> To unsubscribe send a blank email to $subst(‘Email.Unsub’)
>
>

I have the W2k version of Ramdisk driver.
Let me know if you want the it (w/source).

-Ramu

-----Original Message-----
From: Steve Huang [mailto:xxxxx@psh.com.cn]
Sent: Monday, March 13, 2000 12:51 AM
To: NT Developers Interest List
Subject: [ntdev] ramdisk driver for w2k

Hi,

Do you know whether there is ramdisk driver for w2k or not?

Any suggestions are appreciated!

Thank you!


Best Regards,
Steve Huang


You are currently subscribed to ntdev as: xxxxx@microsoft.com
To unsubscribe send a blank email to $subst(‘Email.Unsub’)

Please send it to me:

xxxxx@storagecraft.com

Thanks

-----Original Message-----
From: xxxxx@lists.osr.com
[mailto:xxxxx@lists.osr.com]On Behalf Of Ramu Ramanathan
Sent: Monday, March 13, 2000 11:47 AM
To: NT Developers Interest List
Subject: [ntdev] RE: ramdisk driver for w2k

I have the W2k version of Ramdisk driver.
Let me know if you want the it (w/source).

-Ramu

-----Original Message-----
From: Steve Huang [mailto:xxxxx@psh.com.cn]
Sent: Monday, March 13, 2000 12:51 AM
To: NT Developers Interest List
Subject: [ntdev] ramdisk driver for w2k

Hi,

Do you know whether there is ramdisk driver for w2k or not?

Any suggestions are appreciated!

Thank you!


Best Regards,
Steve Huang


You are currently subscribed to ntdev as: xxxxx@microsoft.com
To unsubscribe send a blank email to $subst(‘Email.Unsub’)


You are currently subscribed to ntdev as: xxxxx@storagecraft.com
To unsubscribe send a blank email to $subst(‘Email.Unsub’)

I also would like a copy. Might be worth putting somewhere
where it can be had via ftp or http though.
xxxxx@gce.com

-----Original Message-----
From: Jamey Kirby [mailto:xxxxx@storagecraft.com]
Sent: Monday, March 13, 2000 3:21 PM
To: NT Developers Interest List
Subject: [ntdev] RE: ramdisk driver for w2k

Please send it to me:

xxxxx@storagecraft.com

Thanks

-----Original Message-----
From: xxxxx@lists.osr.com
[mailto:xxxxx@lists.osr.com]On Behalf Of Ramu Ramanathan
Sent: Monday, March 13, 2000 11:47 AM
To: NT Developers Interest List
Subject: [ntdev] RE: ramdisk driver for w2k

I have the W2k version of Ramdisk driver.
Let me know if you want the it (w/source).

-Ramu

-----Original Message-----
From: Steve Huang [mailto:xxxxx@psh.com.cn]
Sent: Monday, March 13, 2000 12:51 AM
To: NT Developers Interest List
Subject: [ntdev] ramdisk driver for w2k

Hi,

Do you know whether there is ramdisk driver for w2k or not?

Any suggestions are appreciated!

Thank you!


Best Regards,
Steve Huang


You are currently subscribed to ntdev as: xxxxx@microsoft.com
To unsubscribe send a blank email to $subst(‘Email.Unsub’)


You are currently subscribed to ntdev as: xxxxx@storagecraft.com
To unsubscribe send a blank email to $subst(‘Email.Unsub’)


You are currently subscribed to ntdev as: xxxxx@FirstUSA.com
To unsubscribe send a blank email to $subst(‘Email.Unsub’)

I have just finished it and still working on a KB to publish it.

However, the Ramdisk sample driver is now available in our ftp site given
below:

http://support.microsoft.com/support/msfe/

After click “Click Here to receive a file” link, use the directory name
“Ramdisk”. It is available as a zip file. (Source + free build binary)

I would appreciate any feedback.

Thanks,
Ramu

-----Original Message-----
From: Everhart, Glenn (FUSA) [mailto:xxxxx@FirstUSA.com]
Sent: Monday, March 13, 2000 12:45 PM
To: NT Developers Interest List
Subject: [ntdev] RE: ramdisk driver for w2k

I also would like a copy. Might be worth putting somewhere
where it can be had via ftp or http though.
xxxxx@gce.com

-----Original Message-----
From: Jamey Kirby [mailto:xxxxx@storagecraft.com]
Sent: Monday, March 13, 2000 3:21 PM
To: NT Developers Interest List
Subject: [ntdev] RE: ramdisk driver for w2k

Please send it to me:

xxxxx@storagecraft.com

Thanks

-----Original Message-----
From: xxxxx@lists.osr.com
[mailto:xxxxx@lists.osr.com]On Behalf Of Ramu Ramanathan
Sent: Monday, March 13, 2000 11:47 AM
To: NT Developers Interest List
Subject: [ntdev] RE: ramdisk driver for w2k

I have the W2k version of Ramdisk driver.
Let me know if you want the it (w/source).

-Ramu

-----Original Message-----
From: Steve Huang [mailto:xxxxx@psh.com.cn]
Sent: Monday, March 13, 2000 12:51 AM
To: NT Developers Interest List
Subject: [ntdev] ramdisk driver for w2k

Hi,

Do you know whether there is ramdisk driver for w2k or not?

Any suggestions are appreciated!

Thank you!


Best Regards,
Steve Huang


You are currently subscribed to ntdev as: xxxxx@microsoft.com
To unsubscribe send a blank email to $subst(‘Email.Unsub’)


You are currently subscribed to ntdev as: xxxxx@storagecraft.com
To unsubscribe send a blank email to $subst(‘Email.Unsub’)


You are currently subscribed to ntdev as: xxxxx@FirstUSA.com
To unsubscribe send a blank email to $subst(‘Email.Unsub’)


You are currently subscribed to ntdev as: xxxxx@microsoft.com
To unsubscribe send a blank email to $subst(‘Email.Unsub’)

After entering the directory name, when I click the “Continue” button,
nothing happens. Is there a problem?

Niraj

Ramu Ramanathan wrote:

I have just finished it and still working on a KB to publish it.

However, the Ramdisk sample driver is now available in our ftp site
given below:

http://support.microsoft.com/support/msfe/

After click “Click Here to receive a file” link, use the directory name
“Ramdisk”. It is available as a zip file. (Source + free build binary)

I would appreciate any feedback.

Thanks,
Ramu

-----Original Message-----
From: Everhart, Glenn (FUSA) [mailto:xxxxx@FirstUSA.com]
Sent: Monday, March 13, 2000 12:45 PM
To: NT Developers Interest List
Subject: [ntdev] RE: ramdisk driver for w2k

I also would like a copy. Might be worth putting somewhere
where it can be had via ftp or http though.
xxxxx@gce.com

-----Original Message-----
From: Jamey Kirby [mailto:xxxxx@storagecraft.com]
Sent: Monday, March 13, 2000 3:21 PM
To: NT Developers Interest List
Subject: [ntdev] RE: ramdisk driver for w2k

Please send it to me:

xxxxx@storagecraft.com

Thanks

> -----Original Message-----
> From: xxxxx@lists.osr.com
> [mailto:xxxxx@lists.osr.com]On Behalf Of Ramu Ramanathan
> Sent: Monday, March 13, 2000 11:47 AM
> To: NT Developers Interest List
> Subject: [ntdev] RE: ramdisk driver for w2k
>
>
> I have the W2k version of Ramdisk driver.
> Let me know if you want the it (w/source).
>
> -Ramu
>
> -----Original Message-----
> From: Steve Huang [mailto:xxxxx@psh.com.cn]
> Sent: Monday, March 13, 2000 12:51 AM
> To: NT Developers Interest List
> Subject: [ntdev] ramdisk driver for w2k
>
>
> Hi,
>
> Do you know whether there is ramdisk driver for w2k or not?
>
> Any suggestions are appreciated!
>
> Thank you!
>
> —
> Best Regards,
> Steve Huang

I had same problem…type “Ramdisk” and not “ramdisk” etc.
sunil.

-----Original Message-----
From: Niraj Jaiswal [mailto:xxxxx@starcomtec.com]
Sent: Tuesday, March 14, 2000 12:40 PM
To: NT Developers Interest List
Subject: [ntdev] RE: ramdisk driver for w2k

After entering the directory name, when I click the “Continue” button,
nothing happens. Is there a problem?

Niraj

Ramu Ramanathan wrote:

I have just finished it and still working on a KB to publish it.

However, the Ramdisk sample driver is now available in our ftp site
given below:

http://support.microsoft.com/support/msfe/

After click “Click Here to receive a file” link, use the directory name
“Ramdisk”. It is available as a zip file. (Source + free build binary)

I would appreciate any feedback.

Thanks,
Ramu

-----Original Message-----
From: Everhart, Glenn (FUSA) [mailto:xxxxx@FirstUSA.com]
Sent: Monday, March 13, 2000 12:45 PM
To: NT Developers Interest List
Subject: [ntdev] RE: ramdisk driver for w2k

I also would like a copy. Might be worth putting somewhere
where it can be had via ftp or http though.
xxxxx@gce.com

-----Original Message-----
From: Jamey Kirby [mailto:xxxxx@storagecraft.com]
Sent: Monday, March 13, 2000 3:21 PM
To: NT Developers Interest List
Subject: [ntdev] RE: ramdisk driver for w2k

Please send it to me:

xxxxx@storagecraft.com

Thanks

> -----Original Message-----
> From: xxxxx@lists.osr.com
> [mailto:xxxxx@lists.osr.com]On Behalf Of Ramu Ramanathan
> Sent: Monday, March 13, 2000 11:47 AM
> To: NT Developers Interest List
> Subject: [ntdev] RE: ramdisk driver for w2k
>
>
> I have the W2k version of Ramdisk driver.
> Let me know if you want the it (w/source).
>
> -Ramu
>
> -----Original Message-----
> From: Steve Huang [mailto:xxxxx@psh.com.cn]
> Sent: Monday, March 13, 2000 12:51 AM
> To: NT Developers Interest List
> Subject: [ntdev] ramdisk driver for w2k
>
>
> Hi,
>
> Do you know whether there is ramdisk driver for w2k or not?
>
> Any suggestions are appreciated!
>
> Thank you!
>
> —
> Best Regards,
> Steve Huang


You are currently subscribed to ntdev as: xxxxx@nsmg.veritas.com
To unsubscribe send a blank email to $subst(‘Email.Unsub’)

Try anonymous ftp to the following link:

ftp://msfe.microsoft.com

you will find ramdisk.zip in the following directory:

/outbound/ramdisk/

-Ramu

-----Original Message-----
From: Niraj Jaiswal [mailto:xxxxx@starcomtec.com]
Sent: Tuesday, March 14, 2000 9:40 AM
To: NT Developers Interest List
Subject: [ntdev] RE: ramdisk driver for w2k

After entering the directory name, when I click the “Continue” button,
nothing happens. Is there a problem?

Niraj

Ramu Ramanathan wrote:

I have just finished it and still working on a KB to publish it.

However, the Ramdisk sample driver is now available in our ftp site
given below:

http://support.microsoft.com/support/msfe/

After click “Click Here to receive a file” link, use the directory name
“Ramdisk”. It is available as a zip file. (Source + free build binary)

I would appreciate any feedback.

Thanks,
Ramu

-----Original Message-----
From: Everhart, Glenn (FUSA) [mailto:xxxxx@FirstUSA.com]
Sent: Monday, March 13, 2000 12:45 PM
To: NT Developers Interest List
Subject: [ntdev] RE: ramdisk driver for w2k

I also would like a copy. Might be worth putting somewhere
where it can be had via ftp or http though.
xxxxx@gce.com

-----Original Message-----
From: Jamey Kirby [mailto:xxxxx@storagecraft.com]
Sent: Monday, March 13, 2000 3:21 PM
To: NT Developers Interest List
Subject: [ntdev] RE: ramdisk driver for w2k

Please send it to me:

xxxxx@storagecraft.com

Thanks

> -----Original Message-----
> From: xxxxx@lists.osr.com
> [mailto:xxxxx@lists.osr.com]On Behalf Of Ramu Ramanathan
> Sent: Monday, March 13, 2000 11:47 AM
> To: NT Developers Interest List
> Subject: [ntdev] RE: ramdisk driver for w2k
>
>
> I have the W2k version of Ramdisk driver.
> Let me know if you want the it (w/source).
>
> -Ramu
>
> -----Original Message-----
> From: Steve Huang [mailto:xxxxx@psh.com.cn]
> Sent: Monday, March 13, 2000 12:51 AM
> To: NT Developers Interest List
> Subject: [ntdev] ramdisk driver for w2k
>
>
> Hi,
>
> Do you know whether there is ramdisk driver for w2k or not?
>
> Any suggestions are appreciated!
>
> Thank you!
>
> —
> Best Regards,
> Steve Huang


You are currently subscribed to ntdev as: xxxxx@microsoft.com
To unsubscribe send a blank email to $subst(‘Email.Unsub’)

Is anything like this available for NT4 SP4/5 (i.e. a ramdisk driver for NT4
SP4/5)?

Ramu Ramanathan wrote:

Try anonymous ftp to the following link:

ftp://msfe.microsoft.com

you will find ramdisk.zip in the following directory:

/outbound/ramdisk/

-Ramu

-----Original Message-----
From: Niraj Jaiswal [mailto:xxxxx@starcomtec.com]
Sent: Tuesday, March 14, 2000 9:40 AM
To: NT Developers Interest List
Subject: [ntdev] RE: ramdisk driver for w2k

After entering the directory name, when I click the “Continue” button,
nothing happens. Is there a problem?

Niraj

Ramu Ramanathan wrote:
>
> I have just finished it and still working on a KB to publish it.
>
> However, the Ramdisk sample driver is now available in our ftp site
> given below:
>
> http://support.microsoft.com/support/msfe/
>
> After click “Click Here to receive a file” link, use the directory name
> “Ramdisk”. It is available as a zip file. (Source + free build binary)
>
> I would appreciate any feedback.
>
> Thanks,
> Ramu
>
> -----Original Message-----
> From: Everhart, Glenn (FUSA) [mailto:xxxxx@FirstUSA.com]
> Sent: Monday, March 13, 2000 12:45 PM
> To: NT Developers Interest List
> Subject: [ntdev] RE: ramdisk driver for w2k
>
> I also would like a copy. Might be worth putting somewhere
> where it can be had via ftp or http though.
> xxxxx@gce.com
>
> -----Original Message-----
> From: Jamey Kirby [mailto:xxxxx@storagecraft.com]
> Sent: Monday, March 13, 2000 3:21 PM
> To: NT Developers Interest List
> Subject: [ntdev] RE: ramdisk driver for w2k
>
> Please send it to me:
>
> xxxxx@storagecraft.com
>
> Thanks
>
> > -----Original Message-----
> > From: xxxxx@lists.osr.com
> > [mailto:xxxxx@lists.osr.com]On Behalf Of Ramu Ramanathan
> > Sent: Monday, March 13, 2000 11:47 AM
> > To: NT Developers Interest List
> > Subject: [ntdev] RE: ramdisk driver for w2k
> >
> >
> > I have the W2k version of Ramdisk driver.
> > Let me know if you want the it (w/source).
> >
> > -Ramu
> >
> > -----Original Message-----
> > From: Steve Huang [mailto:xxxxx@psh.com.cn]
> > Sent: Monday, March 13, 2000 12:51 AM
> > To: NT Developers Interest List
> > Subject: [ntdev] ramdisk driver for w2k
> >
> >
> > Hi,
> >
> > Do you know whether there is ramdisk driver for w2k or not?
> >
> > Any suggestions are appreciated!
> >
> > Thank you!
> >
> > —
> > Best Regards,
> > Steve Huang


You are currently subscribed to ntdev as: xxxxx@microsoft.com
To unsubscribe send a blank email to $subst(‘Email.Unsub’)


You are currently subscribed to ntdev as: xxxxx@lucent.com
To unsubscribe send a blank email to $subst(‘Email.Unsub’)


i There’s a Cross |
r h to bridge |
c the Great Divide… |

Rich Pennenga
Lucent Technologies, Rm 2B-530A, 101 Crawfords Corner Road
Holmdel, NJ 07733 Voice/Fax (732) 817-5927
Y2K http://sjbcs.web.lucent.com/~dween/ctiy2k.htm
GlassRoom http://sjbcs.web.lucent.com/~dween/cti-esc.htm

Yes, in the DDK.

-----Original Message-----
From: xxxxx@lists.osr.com
[mailto:xxxxx@lists.osr.com]On Behalf Of Richard J. Pennenga
Sent: Wednesday, March 15, 2000 6:48 AM
To: NT Developers Interest List
Subject: [ntdev] RE: ramdisk driver for w2k

Is anything like this available for NT4 SP4/5 (i.e. a ramdisk
driver for NT4
SP4/5)?

Ramu Ramanathan wrote:
>
> Try anonymous ftp to the following link:
>
> ftp://msfe.microsoft.com
>
> you will find ramdisk.zip in the following directory:
>
> /outbound/ramdisk/
>
> -Ramu
>
> -----Original Message-----
> From: Niraj Jaiswal [mailto:xxxxx@starcomtec.com]
> Sent: Tuesday, March 14, 2000 9:40 AM
> To: NT Developers Interest List
> Subject: [ntdev] RE: ramdisk driver for w2k
>
> After entering the directory name, when I click the “Continue” button,
> nothing happens. Is there a problem?
>
> Niraj
>
> Ramu Ramanathan wrote:
> >
> > I have just finished it and still working on a KB to publish it.
> >
> > However, the Ramdisk sample driver is now available in our ftp site
> > given below:
> >
> > http://support.microsoft.com/support/msfe/
> >
> > After click “Click Here to receive a file” link, use the
directory name
> > “Ramdisk”. It is available as a zip file. (Source + free build binary)
> >
> > I would appreciate any feedback.
> >
> > Thanks,
> > Ramu
> >
> > -----Original Message-----
> > From: Everhart, Glenn (FUSA) [mailto:xxxxx@FirstUSA.com]
> > Sent: Monday, March 13, 2000 12:45 PM
> > To: NT Developers Interest List
> > Subject: [ntdev] RE: ramdisk driver for w2k
> >
> > I also would like a copy. Might be worth putting somewhere
> > where it can be had via ftp or http though.
> > xxxxx@gce.com
> >
> > -----Original Message-----
> > From: Jamey Kirby [mailto:xxxxx@storagecraft.com]
> > Sent: Monday, March 13, 2000 3:21 PM
> > To: NT Developers Interest List
> > Subject: [ntdev] RE: ramdisk driver for w2k
> >
> > Please send it to me:
> >
> > xxxxx@storagecraft.com
> >
> > Thanks
> >
> > > -----Original Message-----
> > > From: xxxxx@lists.osr.com
> > > [mailto:xxxxx@lists.osr.com]On Behalf Of Ramu Ramanathan
> > > Sent: Monday, March 13, 2000 11:47 AM
> > > To: NT Developers Interest List
> > > Subject: [ntdev] RE: ramdisk driver for w2k
> > >
> > >
> > > I have the W2k version of Ramdisk driver.
> > > Let me know if you want the it (w/source).
> > >
> > > -Ramu
> > >
> > > -----Original Message-----
> > > From: Steve Huang [mailto:xxxxx@psh.com.cn]
> > > Sent: Monday, March 13, 2000 12:51 AM
> > > To: NT Developers Interest List
> > > Subject: [ntdev] ramdisk driver for w2k
> > >
> > >
> > > Hi,
> > >
> > > Do you know whether there is ramdisk driver for w2k or not?
> > >
> > > Any suggestions are appreciated!
> > >
> > > Thank you!
> > >
> > > —
> > > Best Regards,
> > > Steve Huang
>
> —
> You are currently subscribed to ntdev as: xxxxx@microsoft.com
> To unsubscribe send a blank email to $subst(‘Email.Unsub’)
>
> —
> You are currently subscribed to ntdev as: xxxxx@lucent.com
> To unsubscribe send a blank email to $subst(‘Email.Unsub’)


i There’s a Cross |
r h to bridge |
c the Great Divide… |

Rich Pennenga
> Lucent Technologies, Rm 2B-530A, 101 Crawfords Corner Road
> Holmdel, NJ 07733 Voice/Fax (732) 817-5927
> Y2K http://sjbcs.web.lucent.com/~dween/ctiy2k.htm
> GlassRoom http://sjbcs.web.lucent.com/~dween/cti-esc.htm
>
> —
> You are currently subscribed to ntdev as: xxxxx@storagecraft.com
> To unsubscribe send a blank email to $subst(‘Email.Unsub’)
>
>