Bugcheck Code 0x00000030

OSR_Community_User · May 12, 2000, 10:12pm

Hello,

Does anybody know the meaning of the Bugcheck Code 0x00000030 ?
The name is SET_OF_INVALID_CONTEXT and info in the brackets after
this is all 0000s.

Anybody have any ideas what this means and how I should go about
debugging this ?

Any help is appreciated.

Thanks
Puja

OSR_Community_User · May 12, 2000, 10:34pm

I think this has to do with the stack frame. I would check for problems with
your stack. This is a very unusual error…

Jamey

-----Original Message-----
From: xxxxx@lists.osr.com
[mailto:xxxxx@lists.osr.com]On Behalf Of xxxxx@usa.net
Sent: Friday, May 12, 2000 10:01 PM
To: NT Developers Interest List
Subject: [ntdev] Bugcheck Code 0x00000030

Hello,

Does anybody know the meaning of the Bugcheck Code 0x00000030 ?
The name is SET_OF_INVALID_CONTEXT and info in the brackets after
this is all 0000s.

Anybody have any ideas what this means and how I should go about
debugging this ?

Any help is appreciated.

Thanks
Puja

You are currently subscribed to ntdev as: xxxxx@storagecraft.com
To unsubscribe send a blank email to $subst(‘Email.Unsub’)

OSR_Community_User · May 16, 2000, 3:35pm

Hello,

This time the problem happened when WinDbg hung (and I restarted it once but could not establish connection) and I restarted it the second time. [I am not sure these were the circumstances when I saw the blue-screen first time, 2 days ago]

I have given below the stack trace from WinDbg. I still have the screen below, as I think if I say in WinDbg, it will cause it to blue-screen. The code is the same 0x00000030 (SET_OF_INVALID_CONTEXT).

Since I’m new to WinDbg, could somebody please help me figure out what is going on ?

A few questions:

1. What is the meaning of No FPO ?
2. What is TrapFrame-EDITED @ 8047052c ?

3. ~ display threads on CPU 0, 1 and 2 as running. Does pressing in WinDbg not stop all the CPUs ? If so, then why are threads on CPU 0, 1 and 2 are said to be “Running” ?

4. The stack for CPU 3 shows some routine KiUnlockDispatcherDatabase() as causing the BugCheck. Any ideas what this does ?

Appreciate any help you can offer me!

Thanks
Puja

== WinDbg Output begins ==

Thread Create: Process=0, Thread=0
Kernel debugger waiting to connect on com2 @ 19200 baud
>
>
>
DMKD: Sending breakin packet…
Thread Create: Process=0, Thread=1
Thread Create: Process=0, Thread=2
Thread Create: Process=0, Thread=3
Kernel Debugger connection established on com2 @ 19200 baud
Kernel Version 2195 Free loaded @ ffffffff80400000
>
>
>
>
Module Load: E:\WINNT\symbols\Free\EXE\ntkrnlmp.pdb (symbols loaded)
E:\WINNT\symbols\Free\EXE\NTKRNLMP.dbg for NTKRNLMP.EXE (symbols loaded)
Hard coded breakpoint hit
>
>
>

*** Fatal System Error: 0x00000030
(0x00000000,0x00000000,0x00000000,0x00000000)

Hard coded breakpoint hit
>
>
> ~
0 1 Running 1 0xFFFFFFFF80068F15
1 2 Running 1 _KiThreadStartup@4
2 3 Running 1 0xFFFFFFFF80A99800
* 3 4 Stopped 1 @KiUnlockDispatcherDatabase@4
>
> kvbns
# FramePtr RetAddr Param1 Param2 Param3 Function Name
00 fffffffff24335ec ffffffff8045302a 0000000000000001 fffffffff2433860 0000000000000000 NT!RtlpBreakWithStatusInstruction (FPO: [1,0,0])
01 fffffffff2433834 ffffffff8042a5b3 ffffffff8042a1e2 0000000000000030 0000000000000000 NT!DbgPrint+0xba (EBP)
02 fffffffff2433bd0 ffffffff80429ea7 0000000000000000 0000000000000000 0000000000000000 NT!KeBugCheckEx+0x32b (EBP)
03 fffffffff2433be8 ffffffff8042de10 0000000000000030 0000000000000202 ffffffff80a9313c NT!KeBugCheck+0xf (FPO: [1,0,0])
04 fffffffff2433bfc ffffffff8042e1dc fffffffff2433ccc fffffffff249fc68 ffffffff80481580 NT!KiEspToTrapFrame+0x2a (FPO: [2,0,3])
05 fffffffff2433c18 ffffffff8043095e fffffffff2433c00 0000000000000000 ffffffff80a9313c NT!KeContextToKframes+0xe0 (EBP)
06 fffffffff2433ca4 ffffffff8042f208 fffffffff2433ccc 0000000000000000 ffffffffffffffff NT!KiRestoreProcessorState+0x26 (No FPO)
07 fffffffff2433cd8 ffffffff8046697c ffffffffffffffff ffffffff8042aba1 ffffffff8046c380 NT!KiIpiServiceRoutine+0x94 (FPO: [2,1,0])
08 fffffffff2433cd8 ffffffff8046697c ffffffffffffffff ffffffff8042aba1 ffffffff8046c380 NT!@KiUnlockDispatcherDatabase@4+0x1c (No FPO)
09 0000000000000204 0000000000000000 0000000000000000 0000000000000000 0000000000000000 NT!@KiUnlockDispatcherDatabase@4+0x1c (No FPO)
>
>
>
> ~0
> kvbns
# FramePtr RetAddr Param1 Param2 Param3 Function Name
00 ffffffff8047051c ffffffff8046631e ffffffffffffff02 00000000000000d1 ffffffff8047053c NT!RtlpBreakWithStatusInstruction+0x1 (FPO: [1,0,0])
01 ffffffff8047051c ffffffff80068f15 ffffffffffffff02 00000000000000d1 ffffffff8047053c NT!KeUpdateSystemTime+0x126 (FPO: [0,2] TrapFrame-EDITED @ 8047052c)
02 0000000000000008 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0xFFFFFFFF80068F15 (No FPO)
>
>
>
>
>
>
> ~1
>
> kvbns
# FramePtr RetAddr Param1 Param2 Param3 Function Name
00 fffffffff1dbfda0 ffffffff8043e866 fffffffff1dbfddc ffffffff80452614 ffffffffff20fe08 NT!RtlCompareMemory+0x14 (FPO: [3,0,0])
01 fffffffff1dbfddc ffffffff80467122 fffffffff6bfe2b8 ffffffffff20fe08 0000000000000000 NT!MmAllowWorkingSetExpansion+0x56 (FPO: [0,0,3])
02 fffffffff1dbfda8 ffffffff80452614 ffffffffff20fe08 0000000000000000 0000000000000000 NT!KiThreadStartup+0x16 (No FPO)
03 fffffffff1dbfddc ffffffff80467122 fffffffff6bfe2b8 ffffffffff20fe08 0000000000000000 NT!PspSystemThreadStartup+0x54 (EBP)
04 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 NT!KiThreadStartup+0x16 (No FPO)
>
>
>
> ~2
>
> kvbns
# FramePtr RetAddr Param1 Param2 Param3 Function Name
00 ffffffff80a99800 ffffffff80a99800 0000000000000000 0000000000000000 0000000000002c8c 0xFFFFFFFF80069BD5 (No FPO)
01 ffffffff80a99800 ffffffff80a99800 0000000000000000 0000000000000000 0000000000002c8c 0xFFFFFFFF80A99800 (No FPO)
>
>
> ~3
> kvbns
# FramePtr RetAddr Param1 Param2 Param3 Function Name
00 fffffffff24335ec ffffffff8045302a 0000000000000001 fffffffff2433860 0000000000000000 NT!RtlpBreakWithStatusInstruction (FPO: [1,0,0])
01 fffffffff2433834 ffffffff8042a5b3 ffffffff8042a1e2 0000000000000030 0000000000000000 NT!DbgPrint+0xba (EBP)
02 fffffffff2433bd0 ffffffff80429ea7 0000000000000000 0000000000000000 0000000000000000 NT!KeBugCheckEx+0x32b (EBP)
03 fffffffff2433be8 ffffffff8042de10 0000000000000030 0000000000000202 ffffffff80a9313c NT!KeBugCheck+0xf (FPO: [1,0,0])
04 fffffffff2433bfc ffffffff8042e1dc fffffffff2433ccc fffffffff249fc68 ffffffff80481580 NT!KiEspToTrapFrame+0x2a (FPO: [2,0,3])
05 fffffffff2433c18 ffffffff8043095e fffffffff2433c00 0000000000000000 ffffffff80a9313c NT!KeContextToKframes+0xe0 (EBP)
06 fffffffff2433ca4 ffffffff8042f208 fffffffff2433ccc 0000000000000000 ffffffffffffffff NT!KiRestoreProcessorState+0x26 (No FPO)
07 fffffffff2433cd8 ffffffff8046697c ffffffffffffffff ffffffff8042aba1 ffffffff8046c380 NT!KiIpiServiceRoutine+0x94 (FPO: [2,1,0])
08 fffffffff2433cd8 ffffffff8046697c ffffffffffffffff ffffffff8042aba1 ffffffff8046c380 NT!@KiUnlockDispatcherDatabase@4+0x1c (No FPO)
09 0000000000000204 0000000000000000 0000000000000000 0000000000000000 0000000000000000 NT!@KiUnlockDispatcherDatabase@4+0x1c (No FPO)

== WinDbg Output ends ==

On 05/12/00, ““Jamey Kirby” ” wrote:
> I think this has to do with the stack frame. I would check for problems with
> your stack. This is a very unusual error…
>
> Jamey
>
>
> > -----Original Message-----
> > From: xxxxx@lists.osr.com
> > [mailto:xxxxx@lists.osr.com]On Behalf Of xxxxx@usa.net
> > Sent: Friday, May 12, 2000 10:01 PM
> > To: NT Developers Interest List
> > Subject: [ntdev] Bugcheck Code 0x00000030
> >
> >
> > Hello,
> >
> > Does anybody know the meaning of the Bugcheck Code 0x00000030 ?
> > The name is SET_OF_INVALID_CONTEXT and info in the brackets after
> > this is all 0000s.
> >
> > Anybody have any ideas what this means and how I should go about
> > debugging this ?
> >
> > Any help is appreciated.
> >
> > Thanks
> > Puja
> >
> > —
> > You are currently subscribed to ntdev as: xxxxx@storagecraft.com
> > To unsubscribe send a blank email to $subst(‘Email.Unsub’)
> >

OSR_Community_User · May 16, 2000, 6:42pm

This bug check occurs when there’s a stack underflow detected when restoring
context coming out of a trap. There’s a check to validate that the current
ESP is less than the ESP saved in the trap frame. If current_esp <
saved_esp, bugcheck.

The trace is interesting. Little digging will show that
KiRestoreProcessorState() is only called from within the kernel debugger
module when coming out of stopped state. This is consistent with the
description saying it’s cauased by hitting ‘go’. Whatever corruption
occurred, happened while the system was in the kdb. I’ve never seen this
(which doesn’t mean much).

Couple of questions:
What’s running on your target? What version of WinDbg are you running on
your host? What’re you doing between stopping the system & hitting ‘go’? Are
you running your own debugger extensions?

I don’t know if this is a kdb problem, or something you’re doing while the
target’s stopped. Probably not your code.

You’ve posted this a couple of times, so I suppose you can recreate it at
will?

Steve McDowell
Network Engines Inc.

-----Original Message-----
From: xxxxx@usa.net [mailto:xxxxx@usa.net]
Sent: Tuesday, May 16, 2000 11:31 AM
To: NT Developers Interest List
Subject: [ntdev] RE: Bugcheck Code 0x00000030

Hello,

This time the problem happened when WinDbg hung (and I restarted it once but
could not establish connection) and I restarted it the second time. [I am not sure these were the circumstances when I saw the blue-screen first time, 2 days ago]

I have given below the stack trace from WinDbg. I still have the screen
below, as I think if I say in WinDbg, it will cause it to blue-screen.
The code is the same 0x00000030 (SET_OF_INVALID_CONTEXT).

Since I’m new to WinDbg, could somebody please help me figure out what is
going on ?

A few questions:

1. What is the meaning of No FPO ?
2. What is TrapFrame-EDITED @ 8047052c ?

3. ~ display threads on CPU 0, 1 and 2 as running. Does pressing
in WinDbg not stop all the CPUs ? If so, then why are threads on CPU 0, 1
and 2 are said to be “Running” ?

4. The stack for CPU 3 shows some routine KiUnlockDispatcherDatabase() as
causing the BugCheck. Any ideas what this does ?

Appreciate any help you can offer me!

Thanks
Puja

== WinDbg Output begins ==

Thread Create: Process=0, Thread=0
Kernel debugger waiting to connect on com2 @ 19200 baud
>
>
>
DMKD: Sending breakin packet…
Thread Create: Process=0, Thread=1
Thread Create: Process=0, Thread=2
Thread Create: Process=0, Thread=3
Kernel Debugger connection established on com2 @ 19200 baud
Kernel Version 2195 Free loaded @ ffffffff80400000
>
>
>
>
Module Load: E:\WINNT\symbols\Free\EXE\ntkrnlmp.pdb (symbols loaded)
E:\WINNT\symbols\Free\EXE\NTKRNLMP.dbg for NTKRNLMP.EXE (symbols loaded)
Hard coded breakpoint hit
>
>
>

*** Fatal System Error: 0x00000030
(0x00000000,0x00000000,0x00000000,0x00000000)

Hard coded breakpoint hit
>
>
> ~
0 1 Running 1 0xFFFFFFFF80068F15
1 2 Running 1 _KiThreadStartup@4
2 3 Running 1 0xFFFFFFFF80A99800
* 3 4 Stopped 1 @KiUnlockDispatcherDatabase@4
>
> kvbns
# FramePtr RetAddr Param1 Param2 Param3 Function
Name
00 fffffffff24335ec ffffffff8045302a 0000000000000001 fffffffff2433860
0000000000000000 NT!RtlpBreakWithStatusInstruction (FPO: [1,0,0])
01 fffffffff2433834 ffffffff8042a5b3 ffffffff8042a1e2 0000000000000030
0000000000000000 NT!DbgPrint+0xba (EBP)
02 fffffffff2433bd0 ffffffff80429ea7 0000000000000000 0000000000000000
0000000000000000 NT!KeBugCheckEx+0x32b (EBP)
03 fffffffff2433be8 ffffffff8042de10 0000000000000030 0000000000000202
ffffffff80a9313c NT!KeBugCheck+0xf (FPO: [1,0,0])
04 fffffffff2433bfc ffffffff8042e1dc fffffffff2433ccc fffffffff249fc68
ffffffff80481580 NT!KiEspToTrapFrame+0x2a (FPO: [2,0,3])
05 fffffffff2433c18 ffffffff8043095e fffffffff2433c00 0000000000000000
ffffffff80a9313c NT!KeContextToKframes+0xe0 (EBP)
06 fffffffff2433ca4 ffffffff8042f208 fffffffff2433ccc 0000000000000000
ffffffffffffffff NT!KiRestoreProcessorState+0x26 (No FPO)
07 fffffffff2433cd8 ffffffff8046697c ffffffffffffffff ffffffff8042aba1
ffffffff8046c380 NT!KiIpiServiceRoutine+0x94 (FPO: [2,1,0])
08 fffffffff2433cd8 ffffffff8046697c ffffffffffffffff ffffffff8042aba1
ffffffff8046c380 NT!@KiUnlockDispatcherDatabase@4+0x1c (No FPO)
09 0000000000000204 0000000000000000 0000000000000000 0000000000000000
0000000000000000 NT!@KiUnlockDispatcherDatabase@4+0x1c (No FPO)
>
>
>
> ~0
> kvbns
# FramePtr RetAddr Param1 Param2 Param3 Function
Name
00 ffffffff8047051c ffffffff8046631e ffffffffffffff02 00000000000000d1
ffffffff8047053c NT!RtlpBreakWithStatusInstruction+0x1 (FPO: [1,0,0])
01 ffffffff8047051c ffffffff80068f15 ffffffffffffff02 00000000000000d1
ffffffff8047053c NT!KeUpdateSystemTime+0x126 (FPO: [0,2] TrapFrame-EDITED @
8047052c)
02 0000000000000008 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0xFFFFFFFF80068F15 (No FPO)
>
>
>
>
>
>
> ~1
>
> kvbns
# FramePtr RetAddr Param1 Param2 Param3 Function
Name
00 fffffffff1dbfda0 ffffffff8043e866 fffffffff1dbfddc ffffffff80452614
ffffffffff20fe08 NT!RtlCompareMemory+0x14 (FPO: [3,0,0])
01 fffffffff1dbfddc ffffffff80467122 fffffffff6bfe2b8 ffffffffff20fe08
0000000000000000 NT!MmAllowWorkingSetExpansion+0x56 (FPO: [0,0,3])
02 fffffffff1dbfda8 ffffffff80452614 ffffffffff20fe08 0000000000000000
0000000000000000 NT!KiThreadStartup+0x16 (No FPO)
03 fffffffff1dbfddc ffffffff80467122 fffffffff6bfe2b8 ffffffffff20fe08
0000000000000000 NT!PspSystemThreadStartup+0x54 (EBP)
04 0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 NT!KiThreadStartup+0x16 (No FPO)
>
>
>
> ~2
>
> kvbns
# FramePtr RetAddr Param1 Param2 Param3 Function
Name
00 ffffffff80a99800 ffffffff80a99800 0000000000000000 0000000000000000
0000000000002c8c 0xFFFFFFFF80069BD5 (No FPO)
01 ffffffff80a99800 ffffffff80a99800 0000000000000000 0000000000000000
0000000000002c8c 0xFFFFFFFF80A99800 (No FPO)
>
>
> ~3
> kvbns
# FramePtr RetAddr Param1 Param2 Param3 Function
Name
00 fffffffff24335ec ffffffff8045302a 0000000000000001 fffffffff2433860
0000000000000000 NT!RtlpBreakWithStatusInstruction (FPO: [1,0,0])
01 fffffffff2433834 ffffffff8042a5b3 ffffffff8042a1e2 0000000000000030
0000000000000000 NT!DbgPrint+0xba (EBP)
02 fffffffff2433bd0 ffffffff80429ea7 0000000000000000 0000000000000000
0000000000000000 NT!KeBugCheckEx+0x32b (EBP)
03 fffffffff2433be8 ffffffff8042de10 0000000000000030 0000000000000202
ffffffff80a9313c NT!KeBugCheck+0xf (FPO: [1,0,0])
04 fffffffff2433bfc ffffffff8042e1dc fffffffff2433ccc fffffffff249fc68
ffffffff80481580 NT!KiEspToTrapFrame+0x2a (FPO: [2,0,3])
05 fffffffff2433c18 ffffffff8043095e fffffffff2433c00 0000000000000000
ffffffff80a9313c NT!KeContextToKframes+0xe0 (EBP)
06 fffffffff2433ca4 ffffffff8042f208 fffffffff2433ccc 0000000000000000
ffffffffffffffff NT!KiRestoreProcessorState+0x26 (No FPO)
07 fffffffff2433cd8 ffffffff8046697c ffffffffffffffff ffffffff8042aba1
ffffffff8046c380 NT!KiIpiServiceRoutine+0x94 (FPO: [2,1,0])
08 fffffffff2433cd8 ffffffff8046697c ffffffffffffffff ffffffff8042aba1
ffffffff8046c380 NT!@KiUnlockDispatcherDatabase@4+0x1c (No FPO)
09 0000000000000204 0000000000000000 0000000000000000 0000000000000000
0000000000000000 NT!@KiUnlockDispatcherDatabase@4+0x1c (No FPO)

== WinDbg Output ends ==

On 05/12/00, ““Jamey Kirby” ” wrote:
> I think this has to do with the stack frame. I would check for problems
with
> your stack. This is a very unusual error…
>
> Jamey
>
>
> > -----Original Message-----
> > From: xxxxx@lists.osr.com
> > [mailto:xxxxx@lists.osr.com]On Behalf Of xxxxx@usa.net
> > Sent: Friday, May 12, 2000 10:01 PM
> > To: NT Developers Interest List
> > Subject: [ntdev] Bugcheck Code 0x00000030
> >
> >
> > Hello,
> >
> > Does anybody know the meaning of the Bugcheck Code 0x00000030 ?
> > The name is SET_OF_INVALID_CONTEXT and info in the brackets after
> > this is all 0000s.
> >
> > Anybody have any ideas what this means and how I should go about
> > debugging this ?
> >
> > Any help is appreciated.
> >
> > Thanks
> > Puja
> >
> > —
> > You are currently subscribed to ntdev as: xxxxx@storagecraft.com
> > To unsubscribe send a blank email to $subst(‘Email.Unsub’)
> >
—
You are currently subscribed to ntdev as: xxxxx@networkengines.com
To unsubscribe send a blank email to $subst(‘Email.Unsub’)

OSR_Community_User · May 19, 2000, 2:13pm

Steve, thanks for your response.

What’s running on your target? What version of WinDbg are you running on
your host? What’re you doing between stopping the system & hitting ‘go’? Are
you running your own debugger extensions?

On target (MS Windows 2000 Ver 5.0 Build 2195), I’m trying to test my Win2K
Bus Driver, using a dummy Win2K Function Driver.

Version of WinDbg: Ver 5.0 (Build 2195), 5.00.2184.1

I was just looking at the stack, etc. between stopping the system and
hitting ‘go’.

I am not running my own debugger extensions (I’m new to WinDbg and NT
kernel-mode debugging and don’t know how to write 'em either).

You’ve posted this a couple of times, so I suppose you can recreate it at
will?

I’ve seen it a couple of times, but I don’t know how to recreate it. Both
times it happened, I don’t know what triggered it. Once it happened when I
stopped/restarted WinDbg, but the other time, this was not the case.

Any help or information you can provide is really appreciated.

Thanks
Puja

-----Original Message-----
From: xxxxx@usa.net [mailto:xxxxx@usa.net]
Sent: Tuesday, May 16, 2000 11:31 AM
To: NT Developers Interest List
Subject: [ntdev] RE: Bugcheck Code 0x00000030

Hello,

This time the problem happened when WinDbg hung (and I restarted it once but
could not establish connection) and I restarted it the second time. [I am not sure these were the circumstances when I saw the blue-screen first time, 2 days ago]

I have given below the stack trace from WinDbg. I still have the screen
below, as I think if I say in WinDbg, it will cause it to blue-screen.
> The code is the same 0x00000030 (SET_OF_INVALID_CONTEXT).
>
> Since I’m new to WinDbg, could somebody please help me figure out what is
> going on ?
>
> A few questions:
>
> 1. What is the meaning of No FPO ?
> 2. What is TrapFrame-EDITED @ 8047052c ?
>
> 3. ~ display threads on CPU 0, 1 and 2 as running. Does pressing
> in WinDbg not stop all the CPUs ? If so, then why are threads on CPU 0, 1
> and 2 are said to be “Running” ?
>
> 4. The stack for CPU 3 shows some routine KiUnlockDispatcherDatabase() as
> causing the BugCheck. Any ideas what this does ?
>
> Appreciate any help you can offer me!
>
> Thanks
> Puja
>
>
> == WinDbg Output begins ==
>
> Thread Create: Process=0, Thread=0
> Kernel debugger waiting to connect on com2 @ 19200 baud
> >
> >
> >
> DMKD: Sending breakin packet…
> Thread Create: Process=0, Thread=1
> Thread Create: Process=0, Thread=2
> Thread Create: Process=0, Thread=3
> Kernel Debugger connection established on com2 @ 19200 baud
> Kernel Version 2195 Free loaded @ ffffffff80400000
> >
> >
> >
> >
> Module Load: E:\WINNT\symbols\Free\EXE\ntkrnlmp.pdb (symbols loaded)
> E:\WINNT\symbols\Free\EXE\NTKRNLMP.dbg for NTKRNLMP.EXE (symbols loaded)
> Hard coded breakpoint hit
> >
> >
> >
>
> *** Fatal System Error: 0x00000030
> (0x00000000,0x00000000,0x00000000,0x00000000)
>
> Hard coded breakpoint hit
> >
> >
> > ~
> 0 1 Running 1 0xFFFFFFFF80068F15
> 1 2 Running 1 _KiThreadStartup@4
> 2 3 Running 1 0xFFFFFFFF80A99800
> * 3 4 Stopped 1 @KiUnlockDispatcherDatabase@4
> >
> > kvbns
> # FramePtr RetAddr Param1 Param2 Param3 Function
> Name
> 00 fffffffff24335ec ffffffff8045302a 0000000000000001 fffffffff2433860
> 0000000000000000 NT!RtlpBreakWithStatusInstruction (FPO: [1,0,0])
> 01 fffffffff2433834 ffffffff8042a5b3 ffffffff8042a1e2 0000000000000030
> 0000000000000000 NT!DbgPrint+0xba (EBP)
> 02 fffffffff2433bd0 ffffffff80429ea7 0000000000000000 0000000000000000
> 0000000000000000 NT!KeBugCheckEx+0x32b (EBP)
> 03 fffffffff2433be8 ffffffff8042de10 0000000000000030 0000000000000202
> ffffffff80a9313c NT!KeBugCheck+0xf (FPO: [1,0,0])
> 04 fffffffff2433bfc ffffffff8042e1dc fffffffff2433ccc fffffffff249fc68
> ffffffff80481580 NT!KiEspToTrapFrame+0x2a (FPO: [2,0,3])
> 05 fffffffff2433c18 ffffffff8043095e fffffffff2433c00 0000000000000000
> ffffffff80a9313c NT!KeContextToKframes+0xe0 (EBP)
> 06 fffffffff2433ca4 ffffffff8042f208 fffffffff2433ccc 0000000000000000
> ffffffffffffffff NT!KiRestoreProcessorState+0x26 (No FPO)
> 07 fffffffff2433cd8 ffffffff8046697c ffffffffffffffff ffffffff8042aba1
> ffffffff8046c380 NT!KiIpiServiceRoutine+0x94 (FPO: [2,1,0])
> 08 fffffffff2433cd8 ffffffff8046697c ffffffffffffffff ffffffff8042aba1
> ffffffff8046c380 NT!@KiUnlockDispatcherDatabase@4+0x1c (No FPO)
> 09 0000000000000204 0000000000000000 0000000000000000 0000000000000000
> 0000000000000000 NT!@KiUnlockDispatcherDatabase@4+0x1c (No FPO)
> >
> >
> >
> > ~0
> > kvbns
> # FramePtr RetAddr Param1 Param2 Param3 Function
> Name
> 00 ffffffff8047051c ffffffff8046631e ffffffffffffff02 00000000000000d1
> ffffffff8047053c NT!RtlpBreakWithStatusInstruction+0x1 (FPO: [1,0,0])
> 01 ffffffff8047051c ffffffff80068f15 ffffffffffffff02 00000000000000d1
> ffffffff8047053c NT!KeUpdateSystemTime+0x126 (FPO: [0,2] TrapFrame-EDITED @
> 8047052c)
> 02 0000000000000008 0000000000000000 0000000000000000 0000000000000000
> 0000000000000000 0xFFFFFFFF80068F15 (No FPO)
> >
> >
> >
> >
> >
> >
> > ~1
> >
> > kvbns
> # FramePtr RetAddr Param1 Param2 Param3 Function
> Name
> 00 fffffffff1dbfda0 ffffffff8043e866 fffffffff1dbfddc ffffffff80452614
> ffffffffff20fe08 NT!RtlCompareMemory+0x14 (FPO: [3,0,0])
> 01 fffffffff1dbfddc ffffffff80467122 fffffffff6bfe2b8 ffffffffff20fe08
> 0000000000000000 NT!MmAllowWorkingSetExpansion+0x56 (FPO: [0,0,3])
> 02 fffffffff1dbfda8 ffffffff80452614 ffffffffff20fe08 0000000000000000
> 0000000000000000 NT!KiThreadStartup+0x16 (No FPO)
> 03 fffffffff1dbfddc ffffffff80467122 fffffffff6bfe2b8 ffffffffff20fe08
> 0000000000000000 NT!PspSystemThreadStartup+0x54 (EBP)
> 04 0000000000000000 0000000000000000 0000000000000000 0000000000000000
> 0000000000000000 NT!KiThreadStartup+0x16 (No FPO)
> >
> >
> >
> > ~2
> >
> > kvbns
> # FramePtr RetAddr Param1 Param2 Param3 Function
> Name
> 00 ffffffff80a99800 ffffffff80a99800 0000000000000000 0000000000000000
> 0000000000002c8c 0xFFFFFFFF80069BD5 (No FPO)
> 01 ffffffff80a99800 ffffffff80a99800 0000000000000000 0000000000000000
> 0000000000002c8c 0xFFFFFFFF80A99800 (No FPO)
> >
> >
> > ~3
> > kvbns
> # FramePtr RetAddr Param1 Param2 Param3 Function
> Name
> 00 fffffffff24335ec ffffffff8045302a 0000000000000001 fffffffff2433860
> 0000000000000000 NT!RtlpBreakWithStatusInstruction (FPO: [1,0,0])
> 01 fffffffff2433834 ffffffff8042a5b3 ffffffff8042a1e2 0000000000000030
> 0000000000000000 NT!DbgPrint+0xba (EBP)
> 02 fffffffff2433bd0 ffffffff80429ea7 0000000000000000 0000000000000000
> 0000000000000000 NT!KeBugCheckEx+0x32b (EBP)
> 03 fffffffff2433be8 ffffffff8042de10 0000000000000030 0000000000000202
> ffffffff80a9313c NT!KeBugCheck+0xf (FPO: [1,0,0])
> 04 fffffffff2433bfc ffffffff8042e1dc fffffffff2433ccc fffffffff249fc68
> ffffffff80481580 NT!KiEspToTrapFrame+0x2a (FPO: [2,0,3])
> 05 fffffffff2433c18 ffffffff8043095e fffffffff2433c00 0000000000000000
> ffffffff80a9313c NT!KeContextToKframes+0xe0 (EBP)
> 06 fffffffff2433ca4 ffffffff8042f208 fffffffff2433ccc 0000000000000000
> ffffffffffffffff NT!KiRestoreProcessorState+0x26 (No FPO)
> 07 fffffffff2433cd8 ffffffff8046697c ffffffffffffffff ffffffff8042aba1
> ffffffff8046c380 NT!KiIpiServiceRoutine+0x94 (FPO: [2,1,0])
> 08 fffffffff2433cd8 ffffffff8046697c ffffffffffffffff ffffffff8042aba1
> ffffffff8046c380 NT!@KiUnlockDispatcherDatabase@4+0x1c (No FPO)
> 09 0000000000000204 0000000000000000 0000000000000000 0000000000000000
> 0000000000000000 NT!@KiUnlockDispatcherDatabase@4+0x1c (No FPO)
>
> == WinDbg Output ends ==
>
>
> On 05/12/00, ““Jamey Kirby” ” wrote:
> > I think this has to do with the stack frame. I would check for problems
> with
> > your stack. This is a very unusual error…
> >
> > Jamey
> >
> >
> > > -----Original Message-----
> > > From: xxxxx@lists.osr.com
> > > [mailto:xxxxx@lists.osr.com]On Behalf Of xxxxx@usa.net
> > > Sent: Friday, May 12, 2000 10:01 PM
> > > To: NT Developers Interest List
> > > Subject: [ntdev] Bugcheck Code 0x00000030
> > >
> > >
> > > Hello,
> > >
> > > Does anybody know the meaning of the Bugcheck Code 0x00000030 ?
> > > The name is SET_OF_INVALID_CONTEXT and info in the brackets after
> > > this is all 0000s.
> > >
> > > Anybody have any ideas what this means and how I should go about
> > > debugging this ?
> > >
> > > Any help is appreciated.
> > >
> > > Thanks
> > > Puja
> > >
> > > —
> > > You are currently subscribed to ntdev as: xxxxx@storagecraft.com
> > > To unsubscribe send a blank email to $subst(‘Email.Unsub’)
> > >
> —
> You are currently subscribed to ntdev as: xxxxx@networkengines.com
> To unsubscribe send a blank email to $subst(‘Email.Unsub’)